0
On a standard ruler, .35 inches would be located between the 1/4 inch mark and the 3/8 inch mark. It would be closer to the 1/4 inch mark, but not quite reaching the 3/8 inch mark. .35 inches is equivalent to 9 millimeters, so it would be slightly less than halfway between the 1/4 inch and 3/8 inch marks on the ruler.
What else can I help you with?
What does 0.73mm look like on a ruler?
0.73 mm would be hard to see, anywhere. If you cut up 1 inch into 35 pieces, each piece is about 0.73 mm.
What does 35 square feet look like?
Well probably like with that line with 35 than a equal sign to the answer
How big is 9MM to the nearest inch?
Approximately 11/32 or .35 of an inch
How many 6 inch by 6 inch tiles are needed for a 212 square foot room?
35
What is the quotient of 1225 divided by 35?
35
What does .35 look like on a ruler?
On a standard ruler, each inch is typically divided into 16 equal parts, known as sixteenths of an inch. To represent .35 on a ruler, you would first convert it to a fraction, which is 35/100 or 7/20. This means that .35 is 7/20 of an inch on the ruler, which would be slightly less than halfway between the 5/16 and 6/16 marks.
What does 0.73mm look like on a ruler?
0.73 mm would be hard to see, anywhere. If you cut up 1 inch into 35 pieces, each piece is about 0.73 mm.
How long is 0.35 on a 12inch ruler?
0.35 on a 12-inch ruler represents 35% of the total length. To calculate this, multiply 12 inches by 0.35, which equals 4.2 inches. Therefore, 0.35 on a 12-inch ruler corresponds to a length of 4.2 inches from the beginning of the ruler.
How big is 35 mm?
It is as big as an Ipod touch. With a lens the size of a doorknob, just a plain doorknob. Nothing fancy. Just a simple doorknob.
Where can I find 35 inch tires online ?
I would look at your local dealer ship such as Tire Kingdom to find 35 inch tires for your car.
What is the area of a triangle 35 inch squared and the base10?
Perhaps 35 inch squared!
What is 35 thousandth of an inch in millimetres?
To convert 35 thousandths of an inch to millimeters, you can use the conversion factor where 1 inch equals 25.4 millimeters. Therefore, 35 thousandths of an inch is calculated as follows: (35 \times 0.001 \times 25.4 = 0.889 millimeters). So, 35 thousandths of an inch is approximately 0.889 mm.
What is half of 70 percent of a ruler?
35% of it.
What does a prime factor tree of 35 look like?
Pretty small. 35 5,7
What does 35 square feet look like?
Well probably like with that line with 35 than a equal sign to the answer
How do you solve 35 feet equals what inches?
1 foot = 12 inch 35 feet = 420 inch
How old was napoleon when he became ruler of France?
35
