0
What else can I help you with?
What does DN 250 PN 25 means?
10"size and 25bar pressure
What does '50' mean on a ring?
The number '50' on a ring typically indicates the ring's size, specifically referring to the circumference in millimeters. In many sizing systems, a size 50 ring would fit a finger with a circumference of approximately 50 mm. It's important to note that ring sizes can vary by region, so it's advisable to check the sizing system used in your area.
What is the mean of 50 and 7190?
Mean(50, 7190) = (50 + 7190)/2 = 7240/2 = 3620
What is 50 hundreds?
50 hundreds is 50/100 or 1/2.If you mean hundredths or 5000 if in fact you mean 50 x 100
What size mattress for a 50 inch bed?
queen
DN 50 valve size?
DN 50 means: "DN": Diametre nominel - Nominal diameter of the valve, and "50" is the size of the valve in [mm]. Alternative is NPS (Nominal pipe size in inches).
What does it mean - DN?
Domain name
What does dn mean on facebook?
Don't no
What is the meaning of DN in DN 50?
It stands for Deutsches Normung=German standard and usually applies to dimensional information in the metric system. Hence DN50 is for 50mm.
What is dn50?
It stands for Deutsches Normung=German standard and usually applies to dimensional information in the metric system. Hence DN50 is for 50mm.
25 Nominal Bore equals how many inches?
50 dn how many inches
What is D63 in d63 DN 50?
it's DN60; d56 = DN56 and d50 = DN50
What does DN 250 PN 25 means?
10"size and 25bar pressure
What does 14k dn mean on your ring?
What does 14k da mean on silver ring
What does PN 500 DN 13 mean?
PN 500 DN 13 refers to a specific standard for pipes and fittings. "PN" stands for "Pressure Nominal," indicating the maximum allowable pressure in bars that the pipe can handle, which in this case is 500 bars. "DN" stands for "Diameter Nominal," which indicates the nominal diameter of the pipe, with DN 13 corresponding to a nominal diameter of 13 millimeters. Together, these terms specify the pressure rating and size of a piping component.
What does it mean when the airplane status is DN?
that means dis nutz
What is the meaning of DN symbol in DN100?
DN is an acronym for Diameter Normal that refer to metric designations of pipes that conform to the International Standards Organisation (ISO). DN100 refers to a pipe with a Diameter Normal of 100 mm and a Nominal Pipe Size (NPS) of 4 inches.Answer:Actually the N means nominal. Because the actual size of the pipe is nowhere what the nominal size is.
