0
. I believe it’s actually two problems. One is converting the .8 feet into inches because that’s 8/10 of a foot and 8/10 of a foot.Is found by putting a ratio together 1 inch equals 12 above one is equal to 4/5, which is the fractional reference representationbe/5 reduced down to the most common denominator so basically take 2 feet which is 24 inches that’s one part of the problem and then the other parts at 8/10 of a foot or 4/5 and then you’ve got to be able to add the inches in to the 2 feet tenths of a foot is equal to 12 over one is equal to 4/5 and if you do the math that comes out to 8 inches 3/5 so I believe the answer is 32 inches and 3/5 after pontificated here which is probably nonsense. I’m gonna try with the tape measure.
On a tape measure, 2.8 inches would be represented as the 2-inch mark followed by the 8/10-inch mark. Each inch on a tape measure is divided into 16 equal parts, so 8/10 inch is equivalent to 8/16 inch, which simplifies to 1/2 inch. Therefore, 2.8 inches on a tape measure would fall between the 2-inch mark and the 3-inch mark, closer to the 3-inch mark.
Ah, measuring can be a peaceful experience. 2.8 inches on a tape measure is simply a little over two and a half inches. Just a small amount, like a happy little squirrel hopping along a branch. Remember, there are no mistakes in measuring, just happy accidents.
2 2/16
Add your answer:
Earn +20 pts
What is 2.7 inches on a tape measure?
2-11/16 in. or a lttle closer still depending on your tape measure 2-21/32 in.
What unit is a tape measure measured in?
One side is inches, the other is centimetes (usually).
What is .3 inches on a tape measure?
A little bit more than 1/4
What is 0.575 on a tape measure?
The answer depends on the units used for the tape measure.
What unit would use to measure the perimeter of your teacher's desk?
I would use a ruler or a tape measure. After I was done, I would express the measurement in centimeters or inches.
What is the unit of tape measure?
You can get tape measures that are graduated in centimetres or inches.
What is 2.2 inches on a tape measure?
On a tape measure, 2.2 inches would be the distance measured from the starting point on the tape measure. Each inch on a tape measure is typically divided into smaller increments, such as eighths or sixteenths of an inch, allowing for precise measurements. In this case, 2.2 inches would fall between the 2-inch mark and the 3-inch mark on the tape measure, indicating a measurement slightly over 2 inches.
How many inches on a tape measure?
The number of inches is printed on its case.
What is 2.290 inches on a tape measure?
You will not be able to measure to that accuracy using a tape measure. You should have marks at tenths of an inch and so you will get 2.3 inches on the tape measure. If you have a tape measure that has divisions to 1/32 of an inch then 2 and 10/32 is the nearest.
What does 1250 inches look like on a tape measure?
It is unlikely that a tape measure will extend that long, but 104.166... feet.
How do you read 2.10 inches on a tape measure?
The inches need to be divided into tenths on the tape Then its 2 inches + 1 sub division (1/10)
What is 2.65 on tape measure?
On a tape measure, 2.65 would typically be interpreted as 2 feet and 7.8 inches. This is because each foot on a tape measure is divided into 12 inches, so the decimal point represents a fraction of a foot. In this case, the .65 would be equivalent to 7.8 inches.
How many centimeters in 1 tape measure?
The length of a tape measure can vary, but a standard tape measure is typically 150 centimeters or 60 inches long.
What is 29.87 inches on a tape measure?
Well honey, 29.87 inches on a tape measure is simply 29 and 7/8 inches. It's not rocket science, just basic math. So next time you need to measure something, just remember that little nugget of info.
How many inches does 22.0 cm equals in inches?
With a ruler or tape measure. It is 8.625 inches
What is 158 inches converted into feet and inches?
Look on a tape measure, 13' 2"
What is 875 inches on a tape measure?
875/12 = 72 feet 11 inches
