this pump is senterfugal and content from 3 stage . stage one is normal pressure and stage 2 is high pressure max pressure is 30 bar and volume is 3000 liter per minute at 10 bar )stage 1
3 converted into binary code is 00000011
1 3rd converted to a decimal = 0.33333...1/3:= 1 ÷ 3= 0.33333... in decimal
0.6 = 6/10 = 3/5
0.375 as a fraction is 3 over 8! ;)
Brittany Barg.
Turbo 3 bar, or simply termed 3.0 bar, is whenever a turbocharger produced boost pressure of 27 psi, since 1.0 bar is equal to 9 psi.
At 3 bar pressure, the boiling point of water is approximately 134 degrees Celsius.
it must be 4.2 bar direct from pump or regulated 3 bar
Believe it or not, we can die from too little oxygen AND too much oxygen. This concept involves partial pressures. If we first consider using standard air (i.e. 20% Oxygen and 80% Nitrogen): (1 bar = 1 kilogram of pressure per square centimetre) At the surface - Total Pressure of air = 1 bar - Pressure of Oxygen = 0.2 bar - Pressure of Nitrogen = 0.8 bar At 10m - Total Pressure of air = 2 bar - Pressure of Oxygen = 0.4 bar - Pressure of Nitrogen = 1.6 bar At 20m - Total Pressure of air = 3 bar - Pressure of Oxygen = 0.6 bar - Pressure of Nitrogen = 2.4 bar At 30m - Total Pressure of air = 4 bar - Pressure of Oxygen = 0.8 bar - Pressure of Nitrogen = 3.2 bar At 40m - Total Pressure of air = 5 bar - Pressure of Oxygen = 1.0 bar - Pressure of Nitrogen = 4.0 bar At 50m - Total Pressure of air = 6 bar - Pressure of Oxygen = 1.2 bar - Pressure of Nitrogen = 4.8 bar At 60m - Total Pressure of air = 7 bar - Pressure of Oxygen = 1.4 bar - Pressure of Nitrogen = 5.6 bar At 70m - Total Pressure of air = 8 bar - Pressure of Oxygen = 1.6 bar - Pressure of Nitrogen = 6.4 bar It is at the partial pressure of 1.6 bar (which occurs at 70m where oxygen becomes toxic. That is why most dive organisations recommend 50m as a maximum for recreational diving. However, if pure oxygen is used: At surface - Pressure of Oxygen = 1 bar At 10m - Pressure of oxygen = 2 bar The oxygen has already become toxic! Hope that answers your question. The concept is called "partial pressures" and "oxygen toxicity" if you want to research more on a search engine.
as far as i am aware should be 3 bar
2.5 bar front wheel and 3 bar back wheel.
Tyre Pressure for Fiat Punto 1.2cc 8V 3 door is 29psi (front) or 2.0 bar 28psi (rear) or 1.9 bar for normal use.
The density of water at 40 Bar pressure is approximately 985 kg/m^3. This value can vary slightly depending on the temperature at which the measurement is taken, but 985 kg/m^3 is a commonly used approximation.
this pump is senterfugal and content from 3 stage . stage one is normal pressure and stage 2 is high pressure max pressure is 30 bar and volume is 3000 liter per minute at 10 bar )stage 1
The density of methane at 250 bar pressure would be approximately 191 kg/m^3.
There is a pressure difference in the building only if the system referred to is NOT a closed system. In a closed, pressurized pipe system the pressure is the same throughout. If open, assuming 3 stories x 10 feet/story, one would add the pressure equivalent to 30 feet of water head.