"SCFH" stands for Standard Cubic Feet per Hour. This is a volumetric flow rate which is used for gases such as air. Since the volume of gases can change dramatically by pressure, a "Standard" is needed to bring the volume to a commonly known value (at sea level).
The volume for liquids is typically incompressible and thus does not need a "standard" pressure when calculating volume or volumetric flow rates.
divide by 60
You don't. Square units and linear units are incompatible units.You don't. Square units and linear units are incompatible units.You don't. Square units and linear units are incompatible units.You don't. Square units and linear units are incompatible units.
3.5 units, or 3 units (to be pedantic).
20 units. NB 12 units = 1 dozen 13 units = Baker's dozen 20 units - 1 score 144 units = 1 gross.
8 units (length X width X height) (2 units) X (2 units) X (2 units) = 8 units
To determine the equivalent SCFH of helium for a given SCFH of air, you need to consider the difference in densities between air and helium. Helium is about 7-8 times lighter than air, so to find the equivalent SCFH of helium, you would multiply the SCFH of air by 7-8, depending on the specific conditions.
110 - 130 Scfn is what in psi
To convert standard cubic feet per hour (scfh) to thousand cubic feet per hour (mcfh) for natural gas, divide the scfh value by 1,000. This will give you the equivalent value in mcfh.
divide by 60
times 60
scfh is "standard cubic feet per hour" and cfh doesn't neccessarily mean "standard". Standard conditions are stanard temperature (293 K), and standard pressure (1 atm, 101,300 Pa).
SCFH stands for Standard Cubic Feet per Hour, and it is a common unit of measurement for the flow rate of gases, such as air. It represents the volume of air (or gas) that flows through a system in one hour under standard conditions of temperature and pressure.
SCFH stands for standard cubic feet per hour
1 cfh = 1 mbh
1 scfh = 0.4719474 ltr/min1 scfh = 0.4719474 ltr/minNop!!1 ft^3/h = 28.316847 ltr/h (exactly) = 0.4719474.. ltr/minThis expression is absolutely correct, but the following shall be noted:the "standard state" in "English Unit" usually means 60℉ and 1 atmosphere, while the "normal state" in "Metric Unit" is based on 0℃ 1 atmosphere.1 scfh = 1 std. ft^3/h = [0.4719474 * (460+32)R/(460+60)R] N ltr/h= 26.79209.. N ltr/h = 0.446535 N ltr/minSo the word 'standard state' shall clearly be definedStefano Kim, Korea
Production for five people was as follows: 8 units, 11 units, 6 units, 12 units, 8 units. What was their average production in units?
117 units