There are 10 milimeters in a centimeter. To get the area of a surface you multiply the lengths of 2 sides adjacent. 10mm x 10mm = 100 mm^2 or 100 square milimeters.
The area is 256 square feet.
Area of square: 1/16 square cm
The area of square is : 2.25
The area of a 3-inch square is: 9 square inches.
The given dimensions are incorrect for it to be a square because a square has 4 equal sides and its area in square units is: a side times a side.
100 sq. mm
Assuming the 10mm bars are arranged in a perfect square pattern, the number of bars at 10mm spacing in 1 square meter would be 1000 bars. This is calculated by dividing the total area (1000 square centimeters) by the area taken up by each bar (1 square centimeter).
There are 10 milimeters in a centimeter. To get the area of a surface you multiply the lengths of 2 sides adjacent. 10mm x 10mm = 100 mm^2 or 100 square milimeters.
we know by definition that 10mm = 1cm if we square both sides we get 100mm2 = 1cm2 so if you have an area given in square millimeters, divide by 100 to get the are in square centimeters.
The area of rectangle is : 100.0
Because... there are 100 square millimetres in a square centimetre ! Each side of a square centimetre measures 10mm - therefore 10mm x 10mm is 100mm2
10mm*10cm = 1cm*10cm = 10 square cm.
The rule of thumb is 1mm square=6Amp so 10mm square will,for safety reasons and for a copper conductor, carry 50Amps.
Area is 78.54mm2
10mm/ 4 sides into 40mm = 10mm per side.
Area = 7.96 mm2 approx.