Best Answer

12 in = 1 ft

→ 40 in × 48 in × 60 in = (40 ÷ 12) ft × (48 × 12) ft × (60 × 12) ft

= 10/3 ft × 4 ft × 5 ft

= 200/3 cu ft

= 66 2/3 cu ft

≈ 66.67 cu ft

More answers

a cubic foot is 12 x 12 x 12 =1728 cubic inches.40x48x60 divided by 1728 = cubic feet 66.667 cubic feet

It is 66*66... (repeating) cubic feet.

Q: What is the cubic feet 40 x 48 x 60 inches?

Write your answer...

Submit

Still have questions?

Continue Learning about Other Math

It is 40 inches because 4 feet equals 48 inches

No. There are 12 inches in a foot. 48 divided by 12 = 4. There are 60 inches in 5 feet.

3 feet is smaller than 48 inches (4 feet).

48 inches by 24 inches = 8 square feet.

There are 12 inches in a foot. Divide 48 inches by 12 or multiply by 1 foot / 12 inches to get the answer. 48 inches * 1 foot / 12 inches = 48/12 feet = 4 feet

Related questions

48*40*52= 99840 cubic inches 99840*3 = 299520 cubic inches 299520 cubic inch = 173.33333333 cubic feet

1 cubic foot = 12 x 12 x 12 = 1728 cubic inches The given cube is 40 x 48 x 52 = 99840 cubic inches = 99840/1728 = 57.777 cubic feet

48 inches by 16 inches by 18 inches = 8 cubic feet.

That is approximately 40 cubic feet. - note,your measurements may not be accurate, I deal with many pallettes and have never seen a 40x40. - 48 " per side is standard.

Something measuring 48 feet by 40 feet by 57 feet will have a volume of 48 x 40 x 57 = 109440 cubic feet.

Volume = 40" * 48" * 48" = 40/12 ft * 4 ft * 4 ft = 10/3 ft * 4 ft * 4 ft = 160/3 cubic ft = 53.33... cu ft

There is not enough information to figure the cubic feet of the pallet. The depth would be needed for that. There is enough information to figure the surface area, which is measured in square feet, square inches, etc. To find the area of an object, take the length times the width. 40 inches X 48 inches = 192 square inches or 16 square feet.

There is no answer to this because you are asking for a cubic measurement but providing only two out of three dimensions. You need three

The question cannot be answered because there is no information on the units used for the measurements given in the question. It should be obvious to anybody that the volume of 40 inches x 48 inches x 48 inches, for example, will be very different to the volume of 40 mm x 48 mm x 48mm.

It is 4 feet because it equals 48 inches

1 ft3 = 12 x 12 x 12 = 1728 in3 48 x 48 x 48 = 110592 : expressed as cu ft this is 110592/1728 = 64 cu ft. Alternative Method : 48 = 4 x 12 : so 483 = 43 x 123 : as 123 is the conversion factor from cubic feet to cubic inches then the answer in cubic feet is 43 = 64.

40inch = 3.33 foot 48 inch = 4 foot so 4 x 4 x 3.33 = 53.328 or 53 and a third cubic feet - as you have three measurements it needs to be in cubic feet either that or the pallet square footage is based only on 40 x 48 3.33 x 4 = 13.32 square feet