To find the radius of a cylinder when the volume is 2500 and the height is 16, you can use the formula for the volume of a cylinder: V = πr^2h. Given that V = 2500 and h = 16, you can rearrange the formula to solve for the radius: r = √(V / (πh)). Plugging in the values, you get r = √(2500 / (16π)) ≈ √39.56 ≈ 6.29. Therefore, the radius of the cylinder is approximately 6.29 units.
2500
Assuming the 100 ft refers to the diameter, radius = 50 feet. Area = pi*r2 = pi*2500 = 7853.98 sq ft (approx).
2500 thats easy how old are you because it sounds like your 5 but 5 re olds can't tYPe like that
75.2% of 2,500 = 75.2% * 2500 = 0.752 * 2500 = 1,880
1250 this is done by dividing 2 with 2500.
Multiply the the value of Pi by the radius2 (squared), then multiply that figure by the height - and you'll have your solution ! Hint: the answer is more than 2500 ft3 but less than 2750 ft3
2500 Cubic Centimeters... It's the volume of a cylinder or cylinders between the bottom stroke and top stroke of the piston or pistons.
To find the radius of a circle when given the surface area, you can use the formula for the area of a circle: A = πr^2, where A is the surface area and r is the radius. Given that the surface area is 2500 square centimeters, you can plug this value into the formula and solve for the radius. 2500 = πr^2 r^2 = 2500/π r ≈ √(2500/π) r ≈ √(795.77) r ≈ 28.2 cm Therefore, the radius of the circle is approximately 28.2 centimeters.
To find the area of a circle you must square the radius. In this case the radius is 50 so 50 squared is 2500. 2500 times pi is about 7, 853.98163
2.5 microlitres is a volume. 2500 nanometres is a length.
If: pi*radius2 = 2500 square m Then: radius = 28.20947918 m Check: pi*28.209479182 = 2500 square m
The 2011 RAM 2500's turning circle is 45.1 ft..
About 2500 m.
The height of the 2012 RAM 2500 is 6 ft. 1.3 in. (73.3 in.).
The height of the 2014 RAM 2500 is 6 ft. 1.3 in. (73.3 in.).
The height of the 2011 RAM 2500 is 6 ft. 1.3 in. (73.3 in.).
To calculate the volume of the silver metal, divide the mass by the density. Volume = mass / density = 2500 g / 10.5 g/cm^3 = 238.1 cm^3. Therefore, 2500 g of silver metal will have a volume of 238.1 cm^3.