15 feet
The diameter is measured from one side to the other going through the center in a straight line. The radius is from the center point to the outside edge in a straight line. So if the wheel is evenly round, the radius is exactly one-half the diameter.
Given that the diameter of the Ferris wheel is 30 feet.
We need to find the radius of the Ferris wheel.
We know that the radius = (diameter / 2).
Therefore, the radius = (30/2)
The radius of the Ferris wheel is 15 feet.
Radius is half the diameter, so a radius of 50 feet the diameter will be 100 feet.
2.5 feet; the radius equals one half of the diameter. 5/2 = 2.5
4 feet. The radius is half the diameter.
Diameter is 16. The radius is half its diameter
The radius of a circle is half the diameter, so in this case, the radius of a 24-foot diameter pool would be 12 feet. The formula to find the radius from the diameter is: radius = diameter / 2. Therefore, the radius of a 24-foot diameter pool is 12 feet.
Radius is half the diameter, so a radius of 50 feet the diameter will be 100 feet.
The diameter of the Texas Star ferris wheel is 212 feet.
The radius is half of the diameter so it is 2.5 Feet.
1 revolution = 2PI radian. 2 revolutions = 4PI radian The angular speed of the Ferris wheel is 4PI radians . Multiply by the radius. The linear speed is 100PI feet per minute.
The Texas Star Ferris Wheel, located in Fair Park, Dallas, has a height of 212 feet. Its radius is approximately 106 feet, as the radius is half of the total height. This iconic attraction is one of the tallest Ferris wheels in the United States and offers stunning views of the surrounding area.
Ova 9000 feet or depending on the diameter
2.5 feet; the radius equals one half of the diameter. 5/2 = 2.5
The difference in feet between the minimum and maximum heights of a car on a Ferris wheel will be the diameter of the Ferris wheel. You might want to add the height of a car above ground at its lowest point to be technically correct.
The distance a rider travels on one turn of a Ferris wheel can be calculated using the circumference formula, (C = 2\pi r), where (r) is the radius of the wheel. For example, if a Ferris wheel has a radius of 20 feet, the rider would travel approximately 125.66 feet in one complete turn. The actual distance may vary slightly based on the wheel's design and any additional movement.
The radius is half of the diameter. For an 18-foot diameter, the radius would be 18 feet ÷ 2 = 9 feet. Therefore, the radius is 9 feet.
If the radius is 8 feet then the diameter will be 16 feet.
4 feet. The radius is half the diameter.