0
What else can I help you with?
What volume of water has a mass of 1kg?
Density of water is 1000kg/m3. Also, Volume = Mass/Density = 1/1000 = 0.001m3. So, volume of water that has mass of 1 kg is 0.001m3.
What is the mass and volume of 1kg of silver?
The mass of 1 kg is 1 kg (or 1000 g). Taking the density of silver at 10.49 grams per cubic centimeter. For volume, divide: (1000 g) ÷ (10.49 g/cm3) = 95.3289 cm3, or 0.09533 liters.
How much is1 tone steam to cubic meter?
for converting cubic meter to ton , density or specific volume is needed. specific volume unite is m3/kg. steam cubic meter/ (cubic meter/kg)= steam (kg ) /1000= tone of steam
Which takes up greater volume 1000 g of water or 1000 g of ethanol?
The 1000 grammes of ethanol will occupy a greater volume because its specific gravity is lower than that of water. s.g. water = ~1.0 s.g. ethanol = ~ 0.794
How do you convert 1 kg to liter if density is given?
density = mass divided by volume volume = mass divided by density V = M/D = 1kg/D whre D is density in kg/liter and one liter is 1000 cubic centimeters
What is the volume of 0.054kg of water?
The volume of water can be calculated using its density, which is approximately 1000 kg/m³. By dividing the mass of water (0.054 kg) by its density, we can find the volume. Therefore, the volume of 0.054 kg of water is approximately 0.000054 m³ or 54 cm³.
What is the Volume of a kg of water?
The volume of a kilogram of water is approximately 1 liter. This is because the density of water is close to 1 gram per cubic centimeter. Since there are 1000 grams in a kilogram, the volume of a kilogram of water is about 1000 cubic centimeters, which is equivalent to 1 liter.
What is the volume of 1000 kilogram of cement?
The volume is(1000)/(density of cement in kg/m3) cubic meters.
Can you explain Density with some example?
Density is the mass per unit volume. For example, 1 cubic meter of water has a mass of 1000 kg, so its density is 1000 kg m-3.
How to convert Ethylene glycol solution weight percent to volume percent?
Assume that you have a 25wt% solution of EG. That means you have 25 kg for every 100 kg of solution. Assuming that the EG is dissolved in water means that the solution would contain 25 kg of EG and 75 kg of water. To find the volume % you need to convert each component to a volume by using their densities. The density of water is 1000 kg/m3 and EG is 1113 kg/m3. Using this data we can figure out the volume of each component of solution. For water: 75 kg / (1000 kg/m3) = 0.075 m3 For EG: 25 kg/(1113 kg/m3) = 0.0225 m3 %Vol = 0.0225 m3 / (0.0225 + 0.075 m3) = 0.231 or 23.1% vol
How do you caculate the mass of a cube?
Apart from calculating the volume, you would also have to know the density. Then, multiply the volume by the density.For example: A cubical water tank has 2 meters on every side. That makes for a volume of 8 cubic meters.The density of water is 1000 kg / cubic meter, so in the end result you have (8 cubic meters) x (1000 kg / cubic meter) = 8000 kg.
1000 liters is the same as how many kilograms?
The conversion of liters to kilograms depends on the substance's density. For water, 1000 liters would be equivalent to 1000 kilograms because the density of water is 1 kg/L. However, for other substances, the conversion would vary based on their density.
How much is one kilogram of water by volumn?
One kilogram of water has a volume of approximately 1 liter.
How many ton in 1 cubic meter of clay?
volume = mass ÷ density. 1 tonne = 1000 kg The volume depends upon the density of the clay which will vary with how wet it is. Dry clay has a density of 1600 kg/m3 → volume = 1000 kg ÷ 1600 kg/m3 = 0.625 m3 Wet clay has a density of 1760 kg/m3 → volume = 1000 kg ÷ 1760 kg/m3 ≈ 0.568 m3 Which means the volume of 1 tonne of clay will be in the range of approx 0.568 m3 to 0.625 m3
What is the mass of 3 liters of water?
At 4°C pure water has a density of 1000 kg/1 m3. 1 litre = 1000 cm3 3 litre = 3000 cm3 = 0.003 m3 Mass = Density x Volume = 1000 kg/1 m3 x 0.003 m3 = 3 kg
Can you find the volume of object which does not sink in water?
If an object does not sink in water, it means the object's density is less than that of water. To find the volume of such an object, you can measure its mass and then divide by the density of water (1000 kg/m^3) to calculate the volume. The formula for volume is volume = mass/density.
What is the volume of a 50 kg person who can just barely float in fresh water?
The volume of a person who can just barely float in fresh water can be calculated by dividing their weight by the density of water. Fresh water has a density of approximately 1000 kg/m^3. Therefore, the volume of a 50 kg person would be 0.05 cubic meters (50 kg / 1000 kg/m^3 = 0.05 m^3).
