Place value: hundredsFace value: three hundred.Place value: hundredsFace value: three hundred.Place value: hundredsFace value: three hundred.Place value: hundredsFace value: three hundred.
Find the value of the fraction.Find the value of the fraction.Find the value of the fraction.Find the value of the fraction.
the value of 6 is 60 000 the value of 7 is 7000 the value of 2 is 200 the value of 4 is 40 the value of 1 is 1
The value is 300.
The answer depends on the value of WHAT! The value of your degree education or the value of your student loan debt!
P(dBm) = 10log10(10mW) = 10dBm
dB = 10log10(50Watt) = 10log10(1000/50) = 10log10(20) = 1 + .3010 = 1.3010dB 1.3 - 10 = -8.7dB
10log10 (p1 /p0 ) where the pi are power values.
dBm is power with reference to 1 milliwatt, expressed on the logarithmic scale (decimals). To compute dBm x, from power P, the following formula is used:x = 10log10(P)This is ten times the logarithm to the base 10 of P.
You can't change a single quantity, only a ratio, into a decibel:The ratio of powers in dB =10log10(P/P0)where P is the measured power and P0 is the reference level for the application.So if the reference is 1W and the signal is 100W the ratio =10log10(100/1) = 10 X 2 = 20dB(For intensities the factor is 20)
The process gain (or 'processing gain') is the ratio of the spread (or RF) bandwidth to the unspread (or baseband) bandwidth. It is usually expressed in decibels (dB).For example, if a 1 kHz signal is spread to 100 kHz, the process gain expressed as a numerical ratio would be 100,000/1,000 = 100. Or in decibels, 10log10(100) = 20 dB.
The process gain (or 'processing gain') is the ratio of the spread (or RF) bandwidth to the unspread (or baseband) bandwidth. It is usually expressed in decibels (dB).For example, if a 1 kHz signal is spread to 100 kHz, the process gain expressed as a numerical ratio would be 100,000/1,000 = 100. Or in decibels, 10log10(100) = 20 dB.
Place value: hundredsFace value: three hundred.Place value: hundredsFace value: three hundred.Place value: hundredsFace value: three hundred.Place value: hundredsFace value: three hundred.
Reference sound intensity Io = 10^−12 W/m² (Threshold of human hearing). Reference sound intensity level LIo = 0 dB-SIL (Threshold of human hearing intensity level). The sound intensity I is measured in watts per meter squared. The sound intensity LI level is measured in decibels (dB).
To increment a value by 1, you have 4 choices:value++;++value;value += 1;value = value + 1;Pre and post processing incrementation/decrementation refers to the first two: ++value and value++.Both do exactly the same, as both will increase the value of 'value' by one.If we have a situation like this:int value = 0;int value1 = 0;value1 = value++;This essentially means:value1 = value;value = value + 1;Where ++value means:value = value + 1;value1 = value;
Product Value Personnel Value Service Value Image Value
The face value of 3 is 3: the value of 3 is 3000The face value of 5 is 5: the value of 5 is 500The face value of 3 is 3: the value of 3 is 3000The face value of 5 is 5: the value of 5 is 500The face value of 3 is 3: the value of 3 is 3000The face value of 5 is 5: the value of 5 is 500The face value of 3 is 3: the value of 3 is 3000The face value of 5 is 5: the value of 5 is 500