The deca- (da) prefix means 10, thus:
10 dam = 10 x 10 m = 100 m = 1 hm (1 hectometre) = 0.1 km = 1000 dm (decimetre) = 10000 cm = 100000 mm
With appropriate multiplication/division, other metric prefixes can be used, eg
10 dam = 0.0001 Mm (mega metres) = 100000000 µm (micro metres), etc.
The decameter or 1 dam is equal to 10 meters. So 10 dam is 100 meters.
just remember this: mm cm dam m dm hm km dam is .10 m okey ?? :D
hm: multiply by 105 dam: multiply by 104
hoeveel is 1 dam in m hoeveel is 1 dam in m
dm means decimeter. It is easy to get confused of dm and dam. dm- decimeter dam- decameter Hope that helped you with ur math.....
The decameter or 1 dam is equal to 10 meters. So 10 dam is 100 meters.
There are many different ways to write 5m in metric units: .005 km .05 hm .5 dam 50 dm 500 cm 5000 mm
In measurement, "da" stands for "deca," which is a metric prefix representing a factor of ten. It is used to denote ten times the base unit, such as a decameter (dam), which equals ten meters. The prefix is part of the International System of Units (SI) and helps simplify communication about measurements.
The abbreviated form of decametre - a metric unit equal to 10 metres - is dam - make sure to distinguish this from dm, short for decimetre, equal to 0.1 metres.
The word DAM in the metric system is dakameter! Hope this helps!
A dekametre (dam) is a metric unit of length equal to 10 metres. It is part of the metric system, which is based on powers of ten. Therefore, 1 dekametre is equivalent to 10,000 millimetres or 0.01 kilometres.
1 dekametre = 10 metres so 10 dekametres = 10*10 = 100 metres. Simple!
1 dekameter (dam) = 10 meters
Yes, the abbreviation for decameter is often written as "dam." A decameter is a unit of length in the metric system equal to ten meters. It is commonly used in various fields such as science and engineering to measure longer distances.
1 dam = 10 metres.
"Dam" Stands For the unit decimeter. It is usually easy to mix the unit abbreviation "dam" with the abbreviation dm which stands for diameter
9 dam is equal to 90 meters. 1 decameter (dam) is equal to 10 meters, so by multiplying 9 dam by 10, we get 90 meters.