1 litre
A 1.0 ml syringe will not hold 1.4 cc.
No .8 ml is 8 tenths of 1 ml
1 cm3= 1 ml so 10,000 cm3= 10,000 mL = 10 Litres.1 cm3= 1 ml so 10,000 cm3= 10,000 mL = 10 Litres.1 cm3= 1 ml so 10,000 cm3= 10,000 mL = 10 Litres.1 cm3= 1 ml so 10,000 cm3= 10,000 mL = 10 Litres.
1 cc equals 1 ml.
1 litre = 1000 ml
It can be measured using tuberculin syringe 1 ml.
A 1.0 ml syringe will not hold 1.4 cc.
To draw up 0.18 ml in a 1 ml syringe, you would pull the plunger to the 0.18 ml marking on the syringe barrel while making sure there are no air bubbles. Make sure to read the measurement at eye level for accuracy. If the syringe does not have a 0.18 ml marking, estimate between the closest incremental markings.
1 ml / 0.08 ml = 12 doses, with a half dose left over.
There is no level for 5 mg on a 1 ml syringe because micrograms (mg) are a measurement of mass and milliliters (ml) are a measurement of volume. You need to know what the concentration of the liquid medication is to convert the 5 mg to ml. At this point, you would be able to measure out the medication in your 1 ml syringe.
On a 1 ml Syringe the line marking .25 ml will be a longer hash mark between .20 ml and .30 ml. When measuring medication always use the syringe included with the medication.
1 ml (millileter) is defined as one cubic centimeter (1 cc) so a 3 ml mark is also a 3 cc mark and hence 1cc is equal to 1/3 of the 3 ml syringe or the 1 ml mark.
1cc = 1ml. So on the syringe marked in ccs, it should be 1cc.
To measure 1 cc (cubic centimeter) using a syringe, ensure you have a syringe marked in milliliters (mL), as 1 cc is equivalent to 1 mL. Pull the plunger back to the 1 mL mark, ensuring there are no air bubbles in the syringe. If you see air bubbles, gently tap the syringe to release them, then adjust the plunger to the 1 mL line again. Always check that the measurement is level with the line for accuracy.
0.3 ml in a 1.875 ml syringe is equal to 16% of the syringe's capacity.
On a 1 ml syringe, 2.5 mg would depend on the concentration of the solution being measured. If you know the concentration (for example, if it’s 1 mg/ml), 2.5 mg would be indicated at the 2.5 mark on the syringe, which is halfway between the 2 ml and 3 ml marks. Always ensure you confirm the concentration of the medication to ensure accurate dosing.
0.4 ml on a 1 ml syringe is equivalent to 40% of the total capacity of the syringe. This would be marked approximately at the 0.4 ml line, which is typically one of the smaller increments on the syringe. If you're reading the measurements, ensure to accurately follow the markings for precise dosing.