0
dear me,,, 6mm, sigh!
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Is 2mm or 3 mm larger in size?
3mm is larger than 2
How big is 3mm in diameter?
3mm.
IF THE diameter of a circle is 3mm what is the circumference?
If the diameter of a circle is 3mm the circumference is: 9.424 mm
Show you in a circle how big is 3mm?
show me an actual size circle of 3 mm
Is 2mm larger than 3mm?
No. The units are the same (mm) so the numbers can be compared directly. 2 < 3 → 2 mm < 3 mm. → 2 mm is less than 3 mm, ie 2 mm is not larger than 3 mm.
Is a 3 mm bead larger than a 6 mm bead?
A 3mm bead is half the size od a 6mm bead, however in welding you have to also add in penetration. A 3mm bead with a penetration of 100% is equal in size to a 50% penetration 6mm bead. 1/2"*3mm=1.5mm; 1/4"*6mm =1.5mm
What is the grain size for chalk?
Well chalk's grain size can vary on the materials used. It is around 3mm-6mm
What is the difference between 6mm and 9mm track spike?
3mm the diffrence is designed for the diffrent style of track you would be running on.
Is 2mm or 3 mm larger in size?
3mm is larger than 2
How big in mm does the hole on a charm have to be to fit a chamilia bracelet?
Wire is 3mm I have purchased glass beads with 6mm hole will they go on the wire?
What thicknesses is med density mdf board available in?
3mm 6mm 9mm 12mm 18mm and then you can double up on thickness not sure the imperial equations
What is the valume of 1mm 3mm 6mm?
Assuming the figures are the lengths of sides you multiply them all together to find the volume. 1 x 3 x 6 = 18 cubic millimetres
How do you tell if a wart is malignant?
If it is 6mm or larger in size get it checked out. Discoloration is also a sign.
Is a 6mm needle larger than a 9mm needle?
yes....bigger the number smaller the gauge
How do you adjust the timing belt tensioner in a 1998 Dodge Stratus?
It depends on the engine. The 2.4L is easy. Insert a 6mm Allen key into tensioner ,insert a 3mm Allen key, long side, into the small hole and turn the 6mm counterclockwise until the 3mm slides in.It will then be locked into place. To tighten the tensioner just turn the 6mm clockwise. The 2.0L has a hydraulic tensioner which needs to be removed and the pin depressed (sometimes in a vice).Then insert a 5/64in. Allen key throughthe hole to keep it depressed. reinstall tensioner and remove Allen key.Tension is correct when the pin can be pushed in and out easily. The V6 requires a special tool.
What is the diameter of a diamond?
it seriously depends, like maybe smaller than 3mm or larger than 7mm, it depends
How big is 3mm in diameter?
3mm.
