0
A solid sphere solid cylinder and hollow solid cylinder having same mass fall from incline surface which will reach ground in least time?
solid sphere solid sphere if air resistance is cosidered (which should be considered if the height from which it falls is high)....if the air resistance is not considered all three fall at the same time irrespective of mass(galileo is famous for this law----all the bodies fall same distances irrespective of their masses--which means a feather and a stone kept in vaccum tude fall at the same time o the ground)
What else can I help you with?
How do inclines work?
Inclined Planes allow heavy objects to be moved up or down using less effort over a greater distance.
What are the properties of a cylinder and how does the keyword "j" relate to its volume calculation?
A cylinder is a three-dimensional shape with two circular bases and a curved surface. Its properties include having a constant cross-sectional area and volume. The keyword "j" is often used to represent the height of the cylinder in volume calculations, where the formula is V r2h, with "r" representing the radius of the base and "h" representing the height.
What safety precautions should be taken when using a vertical incline for rock climbing?
When using a vertical incline for rock climbing, it is important to take safety precautions such as wearing a helmet, using proper climbing gear like harnesses and ropes, checking equipment for wear and tear, having a spotter or belayer for support, and being aware of your surroundings to avoid hazards.
How does the sole of the shoe effect the friction between the surfaces?
The sole of the shoe can affect friction by changing the contact area and texture between the surfaces. A sole with a rough texture or pattern can increase friction by providing more surface area for grip. On the other hand, a smooth sole may reduce friction by having less surface contact with the ground.
How do you make it look like you are floating in a picture?
To make it look like you are floating in a picture, you can try jumping off the ground and having someone take a photo of you mid-air. You can also lay down on a surface and have the photo taken from an angle that makes it look like you are floating above the ground. Finally, you can use editing software to remove any visible support structures in the picture to make it seem like you are floating.
What is the surface area of a cylinder having a base diameter of 8 and a height of 10?
The curved surface area of this cylinder is 251.33 units2
What is the surface area of a cylinder height of 5.25 and diameter of 1.75?
The curved surface area of a cylinder having a height of 5.25 and diameter of 1.75 is 28.588 units squared.
What is the surface area of a cylinder if the radius is 7 feet and the height is 19.5 feet?
A cylinder having a radius of 7 feet and a height of 19.5 feet has a surface area of 1,165.53 ft2
How dies the friction between the ground and molecules in the air affect wind?
The wind at the surface of the ground where the molecules are having friction is moving slower than the wind above the surface.
Does the diameter surface area and circumference affect the heat loss?
yes heat loss is affected by diameter, circumference and surface area. Heat loss depends on the surface area : volume ratio.......the larger this is the more heat is lost if a cylinder having the same volume but a different surface area...(therefre radius and circumference is different)........the cylinder having the larger surface area will loose heat fastest
What is the surface area of a cylinder having a base diameter of 8 inches and a height of 5 inches?
40pi or about 125.6
What does a incline plane do?
The purpose of an inclined plane is to be able to get up stairs and steps without having to step up onto them. It sits over the steps and provides a smooth angled surface to walk up and down on.
What is the surface area of a cylinder with a radius of 5 meters and a height of 4 meters?
The circumference of that cylinder would be 31.4156 meters, and with a height of 4 meters, the outside surface of the sides would be 125.66 square meters. Does a cylinder have both an inside and outside surface? There is no thickness at all to the sides. Maybe it needs to be doubled, to be 251.32 square meters so we get both inside and outside surface, but I think not. A cylindrical *prism* would have a top and bottom, each having a surface of 78.54 square meters, for a total of 282.74 square meters.
Is it a leak in your brake line if your brake light came on and went off after it was topped off then happened again a few days later and how much to fix?
It is either a brake line or the master cylinder or a wheel cylinder/caliper. Park on a clean dry surface. Look under the car for wet patches on the ground, especially behind the wheels, it may indicate where the fault is. If the surface remains dry then it is likely to be the master cylinder/servo. It is difficult to say what the cost will be because of the disparate cost of the individual parts. Having said that, the repair could be around $300. But you must get it seen to straight away, it is not safe to drive.
What is the advantages of dry cylinder liners?
The main reason for having a cylinder liner is the liner can be removed. If the cleances are to great it can be replaced.
The figure formed by the intersection of a solid with a plane parallel to the base of the solid is congruent to the base if the solid is a?
The answer would be a right cylinder. A right cylinder is a cylinder that has a closed circular surface having two parallel bases on both the ends and whose elements are perpendicular to its base.
What is the ratio of the volume of a cylinder to the volume of a cylinder having the same height but twice the radius?
1 to 4
