-9
The only way you can do this that I am aware of, is to by an after market pully for the vehicle, you have to unplug and remove the A?C compressor, and bolt the new pully/bracket to the engine blok in place of the compressor.
use impact gun
I a 97 pick up and the power steering pully is pressed on and pressed off
bottom left, next to the tension pully. must remove gravel shield to access
Check the harmonic balancer they had problems with the rubber insert going bad and causing the symptoms you are describing
It looks like a wheel.
It changes the direction of an applied force.
a fixed pulley is a pulley that stays at one place to pick up an object. A clothes hanger is a fixed pulley.....this is all i know good luck...
A fixed pulley is attached to a surface and only changes the direction of the force applied, while a movable pulley is attached to the object being moved and changes both the direction and the amount of force required to move the object.
Trading force for distance, distance for force, and speed for force. NO NO NO pully's triggers and trampines
there are pullys runners(not fixed) and gun tackle and luff tackle(both fixed and non fixed pully combinations) levers crowbar fishing rod teeter totter and incline planes- ramp screw wedge
if you use a double fixed pully, it could make the rope or wire haver that much more preasure
wrap the belt around the pully to hold pully still
A pully is used to lift thing depending on how big the obJect is
B.S. Pully was born on 1910-05-14.
B.S. Pully died on 1972-01-06.
none it is a pully not a push lol