5
Foot-pounds
To convert a weight measurement, you need to know the conversion factor. For example, to convert pounds to kilograms, you multiply the number of pounds by 0.45. To convert kilograms to pounds, divide the number of kilograms by 0.45. Use the appropriate conversion factor depending on the units you are converting between.
A ton would equal 2,000 pounds (lbs). So just do 27 * 2,000 and you get 54,000 pounds.
To convert pounds to tons, you can use the conversion factor where 1 ton equals 2,000 pounds. Therefore, to find out how many tons are in 12,000 pounds, you divide 12,000 by 2,000. This calculation shows that 12,000 pounds is equal to 6 tons.
C-40 concrete has a characteristic compressive strength of 40 MPa (megapascals). To convert this to psi (pounds per square inch), you can use the conversion factor where 1 MPa is approximately equal to 145.038 psi. Therefore, C-40 concrete is equivalent to about 5,800 psi.
a multiplier of 5
M40 is a concrete mix design that typically has a compressive strength of 4,000 psi (pounds per square inch) at 28 days.
To convert pounds to kilograms, the factor used is 0.453592. You multiply the weight in pounds by this conversion factor to get the equivalent weight in kilograms.
The factor is 0.454
Tensile strength is given in ksi. To get pounds you need to know the area. Pounds = strength x area. For example if the specimen is 100 ksi strength and area 1 sq inch, pounds = 100 x 1 = 100 kilopounds = 100000 pounds. f the specimen is 100 ksi strength and area 2 sq inch, pounds = 100 x 2 = 200 kilopounds = 200000 pounds. In any case strength in ksi is the same for a given material and that is why ksi is used.
The conversion factor from pounds-mass (lbm) to pounds-mole (lbmol) is the molecular weight of the substance in pounds per mole.
Pounds x 0.454 = kilograms
Neither. Bolt tensile strength is in pounds per square inch. You are confusing torque with bolt strength. Typically a bolt will be torqued to stretch the bolt and preload it to about 50% of its strength. The relation between torque T and preload P is T = 0.15DP where D is bolt diameter(inch), T is inch pounds and P is pounds. Then stress is P/A where A is bolt area and this stress is 1/2 of strength. Note that torque in foot pounds is simply in lb/12, or 12 inch pounds = 1 ft lb
How do I convert foot pounds of torque to a tensile strength
It is the strength in pounds per square inch of a material at which it will be pulled apart.
2.205 pounds (the common conversion factor 2.2)
1 kilogram is equivalent to 2.20462 pounds. This conversion factor is commonly used to convert between the metric system (kilograms) and the imperial system (pounds).