0
We solve this by ratios. 1 in/2 ft = 7/8 in/X ft; so X = 7/8*2 = 14/8 = 1 3/4 ft.
and 1/2 = 5/8/Y so Y = 5/8*2 = 10/8 = 1 1/4 ft.
ANS D.
Add your answer:
Earn +20 pts
If 18 feet 10 inches is cut from a wire that is 25 feet 8 inches long what is the lenghth of the that is left?
1 feet = 12 inch(25 feet + 8 inch ) - (18 feet + 10 inch) = (24 feet + 20 inch) - (18 feet + 10 inch)= 6 feet + 10 inchthe reminder is 6 feet 10 inch
What is the measure of length equal to 5.4 cm or 2.75 ins?
The measurement you are referring to to is a nail. 1 nail = 3 digits = 21⁄4 inches = 1⁄16 yard = 5.715cmThe measurement dates back to Anglo-Saxon England. The Anglo-Saxon system started with the most basic unit of measurement being a poppyseed, which was approximately 1/4 barleycorn.3 barleycorns (the length of 3 corns) = 1 inchThe barleycorn is still the basis for current UK and U.S. shoe sizes, with the largest shoe size taken as thirteen inches (a size 13) and then counting backwards in barleycorn units, although the original derivation was: less than 13 barleycorns: infants with no shoes; 13 to 26 barleycorns: children's sizes 1 to 12; 26 to 39 barleycorns: men's sizes 1 to 13.Other units of measurement were:The digit: 3/4 inchThe finger: 7/8 inchPalm: 3 inches,Hand: 4 inches,Shaftment: 61/2 inches (reduced to 6 inches after 1066),Span: = 3 palms = 9 inches,Foot: originally 13 inches, 12 inches after 1066,Cubit: 18 inchesEll: = 20 nails = 45 inches = 11/4 yards,Yard (introduced after 1066) = 3 feet = 36 inchesFathom: 6 feetRod: Originally 20 feet (260 inches), after 1066 redefined as 161/2 feet, (198 inches)Chain: = 4 rods,Furlong: Originally the distance a plough team could be driven without rest. Now deemed to be 660 feet, 40 rods or 10 chains,Mile: Originally like the Roman mile set at 5000 feet. The Roman mile was divided into 8 stadia. The closest English equivalent was the furlong, so the mile was increased to 5,280 feet to accommodate 8 furlongs,
What is a name for a length equal to 5.7 cm?
1 nail.57 millimeters or about two inches.=========================The measurement you are referring to to is a nail. 1 nail = 3 digits = 21⁄4 inches = 1⁄16 yard = 5.715cmThe measurement dates back to Anglo-Saxon England. The Anglo-Saxon system started with the most basic unit of measurement being a poppyseed, which was approximately 1/4 barleycorn.3 barleycorns (the length of 3 corns) = 1 inchThe barleycorn is still the basis for current UK and U.S. shoe sizes, with the largest shoe size taken as thirteen inches (a size 13) and then counting backwards in barleycorn units, although the original derivation was: less than 13 barleycorns: infants with no shoes; 13 to 26 barleycorns: children's sizes 1 to 12; 26 to 39 barleycorns: men's sizes 1 to 13.Other units of measurement were:The digit: 3/4 inchThe finger: 7/8 inchPalm: 3 inches,Hand: 4 inches,Shaftment: 61/2 inches (reduced to 6 inches after 1066),Span: = 3 palms = 9 inches,Foot: originally 13 inches, 12 inches after 1066,Cubit: 18 inchesEll: = 20 nails = 45 inches = 11/4 yards,Yard (introduced after 1066) = 3 feet = 36 inchesFathom: 6 feetRod: Originally 20 feet (260 inches), after 1066 redefined as 161/2 feet, (198 inches)Chain: = 4 rods,Furlong: Originally the distance a plough team could be driven without rest. Now deemed to be 660 feet, 40 rods or 10 chains,Mile: Originally, like the Roman mile, set at 5000 feet. The Roman mile was divided into 8 stadia. The closest English equivalent was the furlong, so the mile was increased to 5,280 feet to accommodate 8 furlongs.
When was the rugby ball invented?
This is one of those questions that is difficult to actual define. The ball that was first used by Web Ellis and the students of Rugby School was in actual fact ROUND. This because it was a soccer ball (football in the uk). However, Richard Lindon (1816 - 1887) and William Gilbert (1799-1877) started making balls for Rugby school out of hand stitched, four-panel, leather casings and pigs' bladders. Both men owned boot and shoe making businesses located close to Rugby school.There is no record as to when the ball became less round and more oval in shape but there is a reference in Tom Brown's school days by Thomas Hughes, an old boy from Rugby school, i.e. "the new ball you may see lie there, quite by itself, in the middle, pointing towards the school goal" which indicates that the ball had become more oval by 1835 when the game was supposed to have taken place.The size and shape of the ball was not written into the rules until 1892:- Length 11 to 11 1/4 inches- Circumference (end on) 30 to 31 inches- Circumference (in width) 25 1/2 to 26 inches- Weight: 12 to 13 ounces- Hand sewn with not less than 8 stitches to the inchThe ball size and shape is now governed by IRB regulations.T
How did the rugby ball evolve?
William Gillbert and Ricgard Lindon were shoe makes in the 1800's. It was then they turned their skills to the making of balls for Rugby school. By the 1850's William Gilbert and Richard Lindon, were the two main suppliers of the pig's bladder & leather clad balls to the boys of Rugby School.Gilbert is still one of the main sullpiers of rugby balls world wide.It was the shape of the pigs bladder which is said to have given rise to the known shape of the rugby ball. However, in the earliest days the ball was more PLUMB shape than you see today . The balls also varied considerably in size in the beginning depending upon how large the pig's bladder was at the time.Then a decison by the sports governing body made the ball dimentions and shape standard butv it did not get in to the rule books until 1892:finally in 2004 IRB Law 2 states:The ball must be oval and made of four panels.Length in line 280 - 300 millimetersCircumference (end to end) 740 - 770 millimetersCircumference (in width) 580 - 620 millimetersMaterial: Leather or suitable synthetic material. It may be treated to make it water resistant and easier to grip.Weight: 410 - 460 gramsAir pressure at start of play: 65.71-68.75 kilopascals, or 0.67-0.70 kilograms per square centimeter, or 9.5-10.0 lbs per square inchThe history of the humble rugby ball.........
How can calculate woven bottom fabrics consumption?
Mathematical consumption:To do this you have to have sample/ below measurements in hand:Waist = 32 inchHip = 44 inchThigh = 26 inchBottom = 18 inchLength = 42 inchSewing allowance to be added 2 inchThe general formula:Width =(Waist+Hip)/2 + (Thigh+Bottom)/2=(32″+44″)/2 + (26″+18″)/2=60″Length = 42″So total requirement is = Length X Width= 42″ X 60″= 2520 sqr inchLet’s assume the width of the fabric role is 56″so, 2520″/56″ = 45″= 45″/36″= 1.25 yrds ( 1 Yrd= 36″)So per doz. it will take = (1.25 X 12)+ 3% = 15.45 Yrds.
What is the length 5.7cms called?
The measurement you are referring to to is a nail. 1 nail = 3 digits = 21⁄4 inches = 1⁄16 yard = 5.715cmThe measurement dates back to Anglo-Saxon England. The Anglo-Saxon system started with the most basic unit of measurement being a poppyseed, which was approximately 1/4 barleycorn.3 barleycorns (the length of 3 corns) = 1 inchThis archaic measure is still the basis for current UK and U.S. shoe sizes, with the largest shoe size taken as thirteen inches (a size 13) and then counting backwards in barleycorn units, although the original derivation was: less than 13 barleycorns: infants with no shoes; 13 to 26 barleycorns: children's sizes 1 to 12; 26 to 39 barleycorns: men's sizes 1 to 13.Other units of measurement were:The digit: 3/4 inchThe finger: 7/8 inchPalm: 3 inches,Hand: 4 inches,Shaftment: 61/2 inches (reduced to 6 inches after 1066),Span: = 3 palms = 9 inches,Foot: originally 13 inches, 12 inches after 1066,Cubit: 18 inchesEll: = 20 nails = 45 inches = 11/4 yards,Yard (introduced after 1066) = 3 feet = 36 inchesFathom: 6 feetRod: Originally 20 feet (260 inches), after 1066 redefined as 161/2 feet, (198 inches)Chain: = 4 rods,Furlong: Originally the distance a plough team could be driven without rest. Now deemed to be 660 feet, 40 rods or 10 chains,Mile: Originally like the Roman mile set at 5000 feet. The Roman mile was divided into 8 stadia. The closest English equivalent was the furlong, so the mile was increased to 5,280 feet to accommodate 8 furlongs,
What is the measurement of 5.7 cm called?
The measurement you are referring to to is a nail. 1 nail = 3 digits = 21⁄4 inches = 1⁄16 yard = 5.715cmThe measurement dates back to Anglo-Saxon England. The Anglo-Saxon system started with the most basic unit of measurement being a poppyseed, which was approximately 1/4 barleycorn.3 barleycorns (the length of 3 corns) = 1 inchThis archaic measure is still the basis for current UK and U.S. shoe sizes, with the largest shoe size taken as thirteen inches (a size 13) and then counting backwards in barleycorn units, although the original derivation was: less than 13 barleycorns: infants with no shoes; 13 to 26 barleycorns: children's sizes 1 to 12; 26 to 39 barleycorns: men's sizes 1 to 13.Other units of measurement were:The digit: 3/4 inchThe finger: 7/8 inchPalm: 3 inches,Hand: 4 inches,Shaftment: 61/2 inches (reduced to 6 inches after 1066),Span: = 3 palms = 9 inches,Foot: originally 13 inches, 12 inches after 1066,Cubit: 18 inchesEll: = 20 nails = 45 inches = 11/4 yards,Yard (introduced after 1066) = 3 feet = 36 inchesFathom: 6 feetRod: Originally 20 feet (260 inches), after 1066 redefined as 161/2 feet, (198 inches)Chain: = 4 rods,Furlong: Originally the distance a plough team could be driven without rest. Now deemed to be 660 feet, 40 rods or 10 chains,Mile: Originally like the Roman mile set at 5000 feet. The Roman mile was divided into 8 stadia. The closest English equivalent was the furlong, so the mile was increased to 5,280 feet to accommodate 8 furlongs,League: Approximately 3 miles, the distance travelled in 1 hour
What is the name of a measurement equal to 5.7 cms?
The measurement you are referring to to is a nail. 1 nail = 3 digits = 21⁄4 inches = 1⁄16 yard = 5.715cmThe measurement dates back to Anglo-Saxon England. The Anglo-Saxon system started with the most basic unit of measurement being a poppyseed, which was approximately 1/4 barleycorn.3 barleycorns (the length of 3 corns) = 1 inchThis archaic measure is still the basis for current UK and U.S. shoe sizes, with the largest shoe size taken as thirteen inches (a size 13) and then counting backwards in barleycorn units, although the original derivation was: less than 13 barleycorns: infants with no shoes; 13 to 26 barleycorns: children's sizes 1 to 12; 26 to 39 barleycorns: men's sizes 1 to 13.Other units of measurement were:The digit: 3/4 inchThe finger: 7/8 inchPalm: 3 inches,Hand: 4 inches,Shaftment: 61/2 inches (reduced to 6 inches after 1066),Span: = 3 palms = 9 inches,Foot: originally 13 inches, 12 inches after 1066,Cubit: 18 inchesEll: = 20 nails = 45 inches = 11/4 yards,Yard (introduced after 1066) = 3 feet = 36 inchesFathom: 6 feetRod: Originally 20 feet (260 inches), after 1066 redefined as 161/2 feet, (198 inches)Chain: = 4 rods,Furlong: Originally the distance a plough team could be driven without rest. Now deemed to be 660 feet, 40 rods or 10 chains,Mile: Originally like the Roman mile set at 5000 feet. The Roman mile was divided into 8 stadia. The closest English equivalent was the furlong, so the mile was increased to 5,280 feet to accommodate 8 furlongs,League: Approximately 3 miles, the distance travelled in 1 hour.
What is the measure of length equal to 5.7cm?
The measurement you are referring to to is a nail. 1 nail = 3 digits = 21⁄4 inches = 1⁄16 yard = 5.715cmThe measurement dates back to Anglo-Saxon England. The Anglo-Saxon system started with the most basic unit of measurement being a poppyseed, which was approximately 1/4 barleycorn.3 barleycorns (the length of 3 corns) = 1 inchThis archaic measure is still the basis for current UK and U.S. shoe sizes, with the largest shoe size taken as thirteen inches (a size 13) and then counting backwards in barleycorn units, although the original derivation was: less than 13 barleycorns: infants with no shoes; 13 to 26 barleycorns: children's sizes 1 to 12; 26 to 39 barleycorns: men's sizes 1 to 13.Other units of measurement were:The digit: 3/4 inchThe finger: 7/8 inchPalm: 3 inches,Hand: 4 inches,Shaftment: 61/2 inches (reduced to 6 inches after 1066),Span: = 3 palms = 9 inches,Foot: originally 13 inches, 12 inches after 1066,Cubit: 18 inchesEll: = 20 nails = 45 inches = 11/4 yards,Yard (introduced after 1066) = 3 feet = 36 inchesFathom: 6 feetRod: Originally 20 feet (260 inches), after 1066 redefined as 161/2 feet, (198 inches)Chain: = 4 rods,Furlong: Originally the distance a plough team could be driven without rest. Now deemed to be 660 feet, 40 rods or 10 chains,Mile: Originally like the Roman mile set at 5000 feet. The Roman mile was divided into 8 stadia. The closest English equivalent was the furlong, so the mile was increased to 5,280 feet to accommodate 8 furlongs,
What is the Measure of length equal to 5.7 cm or 2and a quarter inches?
The measurement you are referring to to is a nail. 1 nail = 3 digits = 21⁄4 inches = 1⁄16 yardThe measurement dates back to Anglo-Saxon England. The Anglo-Saxon system started with the most basic unit of measurement being a poppyseed, which was approximately 1/4 barleycorn.3 barleycorns (the length of 3 corns) = 1 inchThis archaic measure is still the basis for current UK and U.S. shoe sizes, with the largest shoe size taken as thirteen inches (a size 13) and then counting backwards in barleycorn units, although the original derivation was: less than 13 barleycorns: infants with no shoes; 13 to 26 barleycorns: children's sizes 1 to 12; 26 to 39 barleycorns: men's sizes 1 to 13.Other units of measurement were:The digit: 3/4 inchThe finger: 7/8 inchPalm: 3 inches,Hand: 4 inches,Shaftment: 61/2 inches (reduced to 6 inches after 1066),Span: = 3 palms = 9 inches,Foot: originally 13 inches, 12 inches after 1066,Cubit: 18 inchesEll: = 20 nails = 45 inches = 11/4 yards,Yard (introduced after 1066) = 3 feet = 36 inchesFathom: 6 feetRod: Originally 20 feet (260 inches), after 1066 redefined as 161/2 feet, (198 inches)Chain: = 4 rods,Furlong: Originally the distance a plough team could be driven without rest. Now deemed to be 660 feet, 40 rods or 10 chains,Mile: Originally like the Roman mile set at 5000 feet. The Roman mile was divided into 8 stadia. The closest English equivalent was the furlong, so the mile was increased to 5,280 feet to accommodate 8 furlongs,League: Approximately 3 miles, the distance travelled in 1 hour.
What should the depth of tread on a tire be?
1/32 inch (according to driversed.com)From the California Vehicle Code online:(1) One thirty-second (1/32) of an inch tread depth in any two adjacent grooves at any location of the tire, except as provided in paragraphs (2) and (3).(2) Four thirty-second (4/32) of an inch tread depth at all points in all major grooves on a tire on the steering axle of any motor vehicle specified in Section 34500, and two thirty-second (2/32) of an inch tread depth at all points in all major grooves on all other tires on the axles of these vehicles.(3) Six thirty-second (6/32) of an inch tread depth at all points in all major grooves on snow tires used in lieu of tire traction devices in posted tire traction device control areas.Stick a penny into the tread with Lincon's head upside down, and if the top of his head is visible it is time to repace the tire.Always replace both tires on the front or both tires on the rear at the same time, and all 4 tires if you have 4 wheel drive or all wheel drive.In the UK, 1.6mm across 75% of the width of the tread.There is no national law in the U.S. on tread depth. However 42 states consider 2/32 the minimum. California & Idaho consider 1/32 the minimum. Arkansas, Montana, New Mexico, North Dakota, South Carolina, and West Virginia have no minimum. A tire below 3/32 cannot pass the Texas safety inspection. In Canada the minimum is 2/32. Some experts including Consumer Reports consider 4/32 the minimum. My opinion is that when the tire has less than 3/32 it should be replaced.Minimum is 2/32 inchthe above answer is correct. most people replace before that around maybe 3 to 4/32nds. 2/32's is by law and is actually a dangerous tread depth in adverse weather. you might be okay around town on dry pavement, but don't stray too far. most people use a penny to measure to the top of Lincolns head is 2/32nds but if you turn your wheel out all the way and get out there is a little bar in the first tread line parallel to the sidewall about every 6 inches or so. That bar is exactly 2/32nds. If your tire is worn in the middle you need to run your tires with less air pressure for longer life. it they are worn on the shoulders, maybe you ran too low air pressure and didn't rotate every 6,000?The minimum depth of tread depends on the class of vehiclePassenger vehicles, Goods vehicles not exceeding 3,500kg max gross weight and Light trailers not exceeding 3,500kg max gross weight - At least 1.6mm throughout a continuous band in the centre 3/4 of the tread and around the entire circumferenceMost vehicles larger than those listed above - At least 1.0mm throughout a continuous band across at least 3/4 of the breadth of the tread and around the entire circumferenceIt depends where you are . -I would never drive on less than 1/8 inch. - I value my safety.Dangerous - especially going round curves in wet weatherDepends on which type. There are wear bars on most if not all tires, that will show a gap or an interruption where the wear limit has been reached. It's easy to see. Having your tires rotated regularly as is in the tires' warranty and in the Owner's Manual will help to get the most out out your tires and any potential warranty claim. If the tires are under or over-inflated most of the time, the wear will show this very clearly as well. Your Owner's Manual will have a page or two on this topic.2/32 inchMinimum tire tread on a passenger vehicle tire is at least 1/32nd of an inch, and truck tires should have a tread of at least 1/8th of an inch on the drive axles and the rest of the tires 1/16th of an inch.
