answersLogoWhite

0

How to convert cubic meters to tons of armour rock with 2.7 specific

What else can I help you with?

Related Questions

Convert 2.66 tons per cubic meters into tons per cubic feet?

To convert 2.66 tons per cubic meter to tons per cubic feet, you first need to convert cubic meters to cubic feet. There are approximately 35.3147 cubic feet in 1 cubic meter. Once you have the conversion factor, multiply the given value (2.66 tons per cubic meter) by the conversion factor to get the equivalent value in tons per cubic feet.


How do you convert ton to cft?

To convert tons to cubic feet (cft), you need to know the density of the material in question. The formula for converting tons to cubic feet is: cubic feet = (tons / density). For example, if you have 2 tons of a material with a density of 100 pounds per cubic foot, the conversion would be: cubic feet = (2 tons / 100 lb/ft^3) = 0.02 cubic feet.


How do you convert 27505 cubic feet of natural gas into metric tons?

About .58 t


How many ton of rock do you need to fill area 40by32by2?

To find the volume of the area, multiply the dimensions: 40 ft × 32 ft × 2 ft = 2,560 cubic feet. To convert this volume to tons of rock, you need to know the density of the rock. Assuming an average density of 100 lbs per cubic foot for gravel, 2,560 cubic feet would weigh approximately 128,000 lbs, which is equivalent to about 64 tons.


How do you convert cubic feet to tons?

Unless you know the desnity, or the substance - you can't. One ton of gravel wouldn't be the same cubic feet as one ton of wheat.


How many tons of pea gravel to cover 958 sq ft 3 thick?

To cover 958 square feet with 3 inches of pea gravel, you first need to convert the thickness to feet, which is 0.25 feet. The volume needed is 958 sq ft × 0.25 ft = 239.5 cubic feet. Since there are approximately 0.67 cubic yards in a cubic foot, you convert to cubic yards: 239.5 cubic feet ÷ 27 = about 8.86 cubic yards. Given that pea gravel weighs about 1.5 tons per cubic yard, you would need approximately 13.3 tons of pea gravel.


How many yards is in 24 tons of drain rock?

To convert tons of drain rock to cubic yards, you typically use the conversion factor that 1 ton of drain rock is approximately equal to 0.67 cubic yards. Therefore, 24 tons of drain rock would be about 16.08 cubic yards (24 tons x 0.67). However, this can vary based on the specific density of the rock, so it's always best to check with the supplier for precise conversions.


How much does 3 cubic yards of topsoil with a density of 125 pounds per cubic foot equal to in weight given in tons?

1 cubic yard is 27 cubic feet, so 3 cubic yards is 81 cubic feet. At 125 lb per cubic foot, that much topsoil would weigh 10,125 lb. At 2000 lb per ton, that converts to 5.0625 tons (if we assume complete precision of all the numbers - if not, then we would be limited to 1 digit of precision because the 3 in 3 cubic yards is only precise to 1 digit. In that case we would have to round the answer off to be 5 tons)


How many tons of sand is 60000 cubic feet?

60,000 cubic feet of dry sand weighs approximately 3000 tons.


Convert 9800 cubic yards of sand to tons?

To convert cubic yards of sand to tons, you can use the following formula: 1 cubic yard of sand is approximately equal to 1.35 tons. Therefore, 9800 cubic yards of sand would be approximately equal to 9800 * 1.35 = 13230 tons.


How do you convert cubic feet per second in tons per hour?

You cannot. Cubic feet per second is a flow rate measured in terms of volume, while tons per hour is a measure of flow rate in terms of mass. Volume and mass are two different measures and according to basic dimensional analysis, conversion from one to the other is not valid.


Convert 25 cubic feet of sand to tons?

Cannot be done without knowing the composition (most importantly the density) of the sand