To determine the amperage in a circuit with a voltage of 120V and a frequency of 60Hz, you would need to know the power rating of the load connected to the circuit. Using Ohm's Law (I = P/V), where I is the current in amps, P is the power in watts, and V is the voltage in volts, you can calculate the amperage. Without knowing the power rating of the load, it is not possible to provide a specific amperage value for this circuit.
To calculate amperage using Ohm's Law (I = V/R), you need to know the resistance (R). In this case, with a voltage of 120V and frequency of 60Hz, you can't determine amperage without knowing the resistance of the circuit.
Five amps is 600 watts on 120 v and 1200 watts on 240 v.
On a 120 v supply 320 watts is 320/120 amps, or 2.667 amps. On a 240 v supply the current is 320/240 amps, or 1.333 amps.
Divide the 1600 w by the 120 v and the answer is 13.33 amps. If you don't know the power factor for the equipment, increase the result by 20% to 16 amps.
Use the formula A = W/V, where A is amps, W is watts and V is voltage.
To calculate amperage using Ohm's Law (I = V/R), you need to know the resistance (R). In this case, with a voltage of 120V and frequency of 60Hz, you can't determine amperage without knowing the resistance of the circuit.
Five amps is 600 watts on 120 v and 1200 watts on 240 v.
Yes, a 1500 watt heater operating on 120 volts has an amperage of A = W/V. Amps = Watts/Volts = 1500/120 = 12.5 amps. It is not a recommended practice to do so.
On 120 v a kilowattt is 8.3 amps, on 240 v it's 4.15 amps.
No, 120 v is not enough.
On a 120 v supply 320 watts is 320/120 amps, or 2.667 amps. On a 240 v supply the current is 320/240 amps, or 1.333 amps.
Divide the 1600 w by the 120 v and the answer is 13.33 amps. If you don't know the power factor for the equipment, increase the result by 20% to 16 amps.
No. Voltage in Australia: 240 V --- 50Hz Voltage in Canada: 120 V --- 60Hz
Use the formula A = W/V, where A is amps, W is watts and V is voltage.
The formula you are looking for is I = W/E. 1080/120 = 9 amps. Less than 1. 1080/120 < 1
A 120V power supply connected to a 30 Ohm resistor will produce 120/30 or 4 amps of current.
The formula you are looking for is W = I x E. I = W/E. A = W/V.