It would take 2500 m^3 (2500 cubic meters) of water. This is equal to 2,500,000 liters or about 660,430 US gallons.
To calculate the volume of water needed to fill a pond measuring 5 meters in length, 2 meters in width, and 1.5 meters in depth, you can use the formula for volume: length × width × depth. This would be 5m × 2m × 1.5m, which equals 15 cubic meters. Therefore, you would need 15 cubic meters of water to fill the pond.
More information is needed in order to answer this question. The size of the pond, preferably in square meters.
No, you should not use water in a deep fryer.
The time it takes for a hot water heater to fill up completely can vary depending on the size of the tank and the water pressure. On average, it can take anywhere from 30 minutes to an hour for a hot water heater to fill up completely.
42,000
1000litres
If you fill it to four feet deep, the total is 10,408 gallons of water.
645divided by 21 equals 30.714. Hence, you can fill completely 30 such containers and 71.4% of the 31st container will be filled with water. Answer two If fill means completely fill, than you can fill 30 containers.
A quick visual of this volume would be an Olympic size pool filled approximately 2 feet deep with water.Dimensions are listed below:50 meters = 164.041995 feet (a)25 meters = 82.0209975 feet (b)2 feet deep (c)Approx = 250,000U.S. gallons
It would take 64 m3 of water, which is 64000 liters or about 16,907 gallons.
That will depend on how deep you want the water to be.
13300 gal of water can fill WHAT? 13,300 gallons of water will fill a 14'x28' pool that's 3 1/2' to 8 1/2' deep.