0
What else can I help you with?
How many buckets are in a gallon?
There is about four gallons of water in an average bucket of water.
If you have a bucket that holds 4 gallons of water and a second bucket that holds 7 gallons of water. The buckets have no markings can you go to the well and bring back exactly 5 gallons of water?
Yes, you can measure exactly 5 gallons using the two buckets. First, fill the 7-gallon bucket completely. Then, pour water from the 7-gallon bucket into the 4-gallon bucket until the smaller bucket is full; this will leave you with 3 gallons in the 7-gallon bucket. Next, empty the 4-gallon bucket and pour the 3 gallons from the 7-gallon bucket into it. Finally, fill the 7-gallon bucket again and pour into the 4-gallon bucket until it is full, which will leave you with exactly 5 gallons in the 7-gallon bucket.
How much water is held in an average bucket?
An average bucket typically holds about 5 gallons (approximately 19 liters) of water. However, the capacity can vary depending on the bucket's size and design, with some larger buckets holding up to 10 gallons (around 38 liters). Standard household buckets usually have a capacity ranging from 3 to 6 gallons.
If I have a bucket of water that holds 4 gallons of water and another bucket that holds 7 gallons of water. The buckets have no markings. How can I go to the well and bring back exactly 5 gallons?
Fill the 4 gal bucket and empty it into the 7 gal bucket. Fill the 4 gal bucket and then fill the 7 gal bucket from the 4 gal. This leaves 1 Gallon in the 4 gallon bucket. Empty the 7 gallon bucket and pour the gallon from the 4 gal lbucket into it. Fill the 4 gal bucket and pour it into the 7 gal bucket. You then have 5 gallons in the 7 gallon bucket.
How many buckets of water does a cow drink everyday?
it takes four gallons to make a gallon of milk not buckets. - Victoria cheyanne seiber
How many buckets of water are needed to fill a tub?
The number of buckets needed to fill a tub depends on the size of both the tub and the buckets. For example, if a standard bathtub holds about 40 gallons of water and a typical bucket holds 5 gallons, you would need approximately 8 buckets to fill the tub. However, this can vary based on the specific dimensions of the tub and bucket used.
I have a bucket of water that holds 4 gallons of water and another that holds 7 gallons of water. The buckets have no markings. How can I go to the well and bring back exactly 5 gallons of water?
# Start with empty buckets, and carry them to the well. # (Note that the larger is the 7-gallon bucket, and the smaller is the 4-gallon bucket.) # Fill the 4-gallon bucket with water to the top. # Empty all the water from the 4-gallon bucket into the 7-gallon bucket. # (Note that there is room in the 7-gallon bucket for exactly 3 more gallons.) # Fill the 4-gallon bucket again. # Pour from the 4-gallon bucket into the 7-gallon bucket all the water that will fit, spilling none. # (Note that since there was room for only 3 more gallons in the 7-gallon bucket, you now have 1 gallon left in the 4-gallon bucket.) # Dump out all the water from the 7-gallon bucket. (Pour it back into the well or onto some flowers so it's not wasted.) # Pour the 1 gallon of water that remains in the 4-gallon bucket into the empty 7-gallon bucket. # Refill the 4-gallon bucket completely. # Pour all the 4 gallons from the 4-gallon bucket into the 7-gallon bucket. # (Note that since the 7-gallon bucket had 1 gallon already and you added 4 gallons, you now have 5 gallons of water in the 7-gallon bucket!) # Bring back your 7-gallon bucket that's holding exactly 5 gallons of water. (Bring your 4-gallon bucket back too, in case you want to play again!)
How many gallons of water is there in an average bucket?
There is about four gallons of water in an average bucket of water.
Is a bucket of water for a horse l or ml?
Typically buckets used for water are measured in quarts and gallons. 4 quarts (qts) equals one gallon (GL).
How many buckets to fill a bath?
The number of buckets needed to fill a bath depends on the size of the bathtub and the volume of the buckets used. A standard bathtub typically holds about 40 to 50 gallons of water, while a common bucket holds around 5 gallons. Therefore, you would need approximately 8 to 10 buckets to fill a standard bathtub completely.
How many buckets to fill up bath tub?
The number of buckets needed to fill a bathtub depends on the size of both the bathtub and the buckets. A standard bathtub holds about 40 to 80 gallons of water, while a typical bucket holds about 5 gallons. Therefore, you would need approximately 8 to 16 buckets to fill the bathtub, depending on its capacity.
what are the long-lasting 10 commandments?
there were 10 buckets of water. they played with the water they wasted 9 buckets of water. how many bucket were there?
