The remainder is 9.963 feet
9.963 feet
With a "ruler" or "tape measure" calibrated in imperial units
A tape measure or a ruler can be marked in any unit of length. Inches, centimeters, feet, and meters are popular. But it could just as well be kilometers, yards, or miles.
A tape measure that measure in feet and inches (or meters and centimeters) would be most appropriate.
A tape measure.measurinng tape
A tape measure is a length of narrow tape of fabric, metal or fibreglass that has length measurements printed on it. If it's a standard metal tape measure it's mounted in a small container with a spring to wind it in. They come in lengths from 3 to 35 feet. 16 feet is the most common although many framers and carpenters like to carry a 25 foot version. Longer tape measures can be made of fibreglass and go up to 300 ft. with 100 being common. These are hand wound on a larger reel and much used by landscapers or road workers.
1. Cloth or Linen tape (available in Different length) 2. Steel Tape (available in Different length) 3. Fiber tape ( " ) 4. Metallic tape ( " ) 5. Invar Tape. ( " )
1. Cloth or Linen tape (available in Different length) 2. Steel Tape (available in Different length) 3. Fiber tape ( " ) 4. Metallic tape ( " ) 5. Invar Tape. ( " )
With a "ruler" or "tape measure" calibrated in imperial units
First get the colors of duct tape that you want. Then you get a piece of cardboard. You trace your feet on the cardboard with a marker. Make sure they are spaced out. Cut out the outline of your feet. Then make a hole where the space between your first and second toes. Next you have to put duct tape on the cardboard. AVOID COVERING THE HOLE. Now you get a somewhat long piece of and you hotdog fold it. Finally you thread the piece of tape throughout the hole. Also don't forget to put a piece of tape at the bottom of the shoes so the tape stays together. There, you have a duct tape flip flop. hope that helped :)
Nail = 2.25 inches Ell = 45 inches (England) Ell (A measure which equals the length of a man's arm and varies from 55 inches (French) to 25 inches (Danish)) !
A long tape measure is best to measure length of a building. They commonly come in 30, 33, 40, 50, 100 and 300 feet.A long tape measure is best to measure length of a building. They commonly come in 30, 33, 40, 50, 100 and 300 feet.
stick a piece of duct tape on it for 7 days and then after that soak your feet in water
Assuming the tape doesn't stretch: 10 ft - 5 × 1 25/100 ft = 10 ft - 5 × 1.25 ft = 10 ft - 6.25 ft = 3.75 ft = 3 75/100 ft 3 and seventy five hundredths ft.
Just short of 2 feet. Look at a tape measure from end to number 22-that is the length in question.
A tape measure or a ruler can be marked in any unit of length. Inches, centimeters, feet, and meters are popular. But it could just as well be kilometers, yards, or miles.
ruler - inches (cm and mm) yard stick (metre stick) - feet (metres) tape measure - feet (metres)
yes, the smaller the length the stronger it will make the tape.