iron bar first
To convert height to meters squared, you first need to understand that height is a linear measurement and cannot be directly converted to an area measurement (meters squared). However, if you have a height measurement in meters and need to express it as an area (like for a rectangle), you would need a second dimension (width). For example, if you have a height of 2 meters and a width of 3 meters, the area would be calculated as height multiplied by width: 2 m × 3 m = 6 m².
They should reach the ground together, since their initial vertical speed is the same, namely zero.
Is it width or height? you have to provide 2nd value,like width (mm) x height (mm) = sq mmYou can convert mm to meters first thenwidth (m) x height (m) = sq meterHopefully it helps you :)--------------------Above answer generated with the help of WWW.FMEOS.COM application.
well first off to get area in a triangle, you must multiply base X height so..... 25 X 12 = 300 sincerely the math armies' 325th platoon skull-plus
At the time the ball is thrown, which is "time 0" the downward speed is 40 m/s.Each second, the downward speed will increase by 9.8 m/s.1. Work out the speed at the end of the first second. This will be 49.8 m/s.2. Then work out how many meters it would have gone in the first second.3. Now work out the ball's height. This is the height at "time 1".4. Draw the ball at time 0 and time 1 on a sheet of paper to help you think.Now, repeat steps 1-4 until the ball's height is close to 0 or goes past 0. Your current "time X" will tell you how many seconds went by for it to get that far.
Both the cotton and the stone will hit the ground at the same time when dropped from the same height in a vacuum, as they will be subject to the same gravitational acceleration. However, in real-world conditions, the stone will likely hit the ground first due to its higher density and lower air resistance compared to the cotton.
To convert height to meters squared, you first need to understand that height is a linear measurement and cannot be directly converted to an area measurement (meters squared). However, if you have a height measurement in meters and need to express it as an area (like for a rectangle), you would need a second dimension (width). For example, if you have a height of 2 meters and a width of 3 meters, the area would be calculated as height multiplied by width: 2 m × 3 m = 6 m².
the first floor of the eiffel tower is 57 meters high and 360 steps from the ground, the second at 115 meters and 1060 meters from the ground. the last floor the third one is at 274 meters from the ground and is only reachable by lift.
If dropped from the same height (a few meters), they would appear to hit the ground at the same time, according to the experiments of Galileo. However, this neglects air resistance on the basketball, which will slow it down more and cause it to hit the ground later (very slightly later). The baseball, which has a smaller area and therefore less air resistance, will hit the ground first.
They should reach the ground together, since their initial vertical speed is the same, namely zero.
Assuming both were dropped from the same height above ground, in a vacuum both would hit the ground at the same time. In a significant atmosphere (e.g. average ground-level on Earch) the bowling ball would hit the ground first.
1 Kg of iron will hit the ground first. Although both the cotton and iron will experience the same acceleration because of their same masses, cotton will experience more air resistance due to its large size.
If dropped from the same height, they will hit the ground at the same time.
Is it width or height? you have to provide 2nd value,like width (mm) x height (mm) = sq mmYou can convert mm to meters first thenwidth (m) x height (m) = sq meterHopefully it helps you :)--------------------Above answer generated with the help of WWW.FMEOS.COM application.
To convert 5 feet 8 inches to meters, first convert the height entirely to inches. There are 12 inches in a foot, so 5 feet equals 60 inches, plus 8 inches gives a total of 68 inches. To convert inches to meters, multiply by 0.0254, which results in approximately 1.7272 meters. Therefore, 5'8'' is approximately 1.73 meters.
You can calculate the kinetic energy just before hitting the ground using the formula for potential energy and kinetic energy. First, calculate the potential energy at the initial height using mgh (mass x gravity x height). Then equate this value to the kinetic energy just before hitting the ground using the formula 1/2mv^2 (0.5 x mass x velocity squared) and solve for the velocity.
the fatty person named after edward fatt who climbed it first