It will work with any of them -- however, it is always best to follow the standard, to avoid confusion and that unpleasant zapping sensation in your hands -- not the mention the possibility of fire!
The green wire is the Ground wire.
See related links below.
Answer for USA, Canada and countries running a 60 Hz power supply service. Extension cord construction If you are constructing an extension cord make sure that the ends go on the right end of the cable. Match the wire end when looking at it, to the proper pin configuration of the plug. Looking at the plug from the blade side directly on you should see a larger blade (silver) on the right, smaller (brass) blade on the left and a U shaped ground blade on the bottom. The white wire connects under the right (silver) coloured screw, the black wire connects under the left (brass) coloured screw and the green wire under the green ground screw. Looking at the end of the cable it should be matched to this configuration. If it doesn't look at the other end of the cable. No wires should cross when connecting to the blades on the plug, if they do you have the wrong end of the cable.
In Bangladesh, the live wire is typically red, brown, or black; the neutral wire is typically blue or black; and the ground wire is typically green or green with a yellow stripe. It is important to consult with a local electrician or electric code regulations for accurate information.
To wire a 3-prong outlet with newer 4-wire cable, you will connect the black and red wires to the brass screws for the hot connections, the white wire to the silver screw for the neutral connection, and the green or bare wire to the green screw for the ground connection. Be sure to consult local electrical codes to ensure proper installation.
the Nike Lunar Eclipse shoe comes in a few different color combinations. The color combinations they have right now are Pink/Black, Lime Green/Grey, Black with a little Lime Green underneath and the the Pink with Black and also a little Lime Green underneath.
Black and Red are hot (2 slots ), white neutral , bare copper (or green) is grounding. The answer is correct, but to carify a bit...Red and black are connected to the brass colored terminals, white to silver and green or bare to the green terminal.
The green wire is the ground wire in electrical wiring. It acts as a safety measure to protect against electric shock by providing a path for current to flow safely to the ground in case of a fault.
Yes, the green conductor is the colour of the ground wire in an extension cord. The black wire is dedicated to be the "hot" and the white conductor is the neutral.
The standard color coding for electrical wires is green for ground, black for hot, and white for neutral.
if you meant color instead of green color it would be black
In Bangladesh, the live wire is typically red, brown, or black; the neutral wire is typically blue or black; and the ground wire is typically green or green with a yellow stripe. It is important to consult with a local electrician or electric code regulations for accurate information.
Black added to any color will produce a darker shade of the color. So, if you add green to black, you would get a darker and darker green until you end up with what appears to be black.
power = light green ground = black
There are probably dozens of black and white wires under the hood. It is a normal color for a ground wire. With out knowing where it or the green wire go, I can not answer.There are probably dozens of black and white wires under the hood. It is a normal color for a ground wire. With out knowing where it or the green wire go, I can not answer.
buy a new extension cord
black
black
Depending on the configuration of the cord cap, the green wire is ground, the white wire is the neutral and red and black wires are the 220 volt source.
Neon green goes WITH black