Multiply by 10. So 27 * 10 = 270 milimeters.
The factors of 27 are 1, 3, 9, 27 When you multiply 9 and/or 27 by 3, you get a number greater than ten.
729
Here is an example: (2/3) * (5/9)First multiply the two numerators (the numbers on the top): 2*5 = 10. This will be your new numerator.Then multiply the two denominators (the numbers on the bottom) : 3*9 = 27.Put your new numerator over your new denominator: 10/27Reduce the new fraction if you need to. (10/27 is fully reduced.)
27' 10" = 27 and 10/12 or 27 and 5/6 or 167/5 feet 4' 6" = 4 and 6/12 or 4 and 1/2 or 9/2 feet To get the area multiply 167/5 and 9/2 to get 1503/10 = 150 and 3/10 or 150.3 square feet
Multiply by 10. So 27 * 10 = 270 milimeters.
The factors of 27 are 1, 3, 9, 27 When you multiply 9 and/or 27 by 3, you get a number greater than ten.
To find a number that is 10 times bigger than 27, you would multiply 27 by 10. This calculation results in 270. Therefore, 270 is the number that is 10 times bigger than 27.
27 decimeters is equal to 270 centimeters. This is because there are 10 centimeters in 1 decimeter.
anything that can be multiplied to get 270 ex:10, 27, 3
27 There are 10 tenths in 1, so there are 2.7 x 10 = 27 tenths in 2.7 Alternatively, to divide by a fraction, invert the fraction and multiply: 2.7 / (1/10) = 2.7 X (10/1) = 2.7 x 10 = 27
135:50 is a ratio. In its simplest form it is 27:10. Now, if we multiply the 135 by 10 (and/or the 50 by 27) we get 1,350and this is the lowest common multiple.
1.67 multiply by 10 raise to power of -27 kg
27.5/1 as a fraction and 27 and 1/2 as a mixed number.27.5 is 27 5/10. To get the improper fraction, multiply 27 times 10 and add the 5:27 x 10 + 5 = 275. The fraction is 275/10.
27
729
27 cm is equal to 270 millimeters. To convert centimeters to millimeters, you need to multiply by 10.