0
On a standard tape measure, 5.1 inches would be represented by the fifth line after the 1-inch mark. Each inch is divided into 16 equal parts, so the 5.1 inch mark would fall between the 5-inch mark and the 6-inch mark. It is important to note that some tape measures may have additional markings for greater precision, such as 1/8 or 1/16 inch increments.
Add your answer:
Earn +20 pts
What is 2.290 inches on a tape measure?
You will not be able to measure to that accuracy using a tape measure. You should have marks at tenths of an inch and so you will get 2.3 inches on the tape measure. If you have a tape measure that has divisions to 1/32 of an inch then 2 and 10/32 is the nearest.
How do you read 2.10 inches on a tape measure?
The inches need to be divided into tenths on the tape Then its 2 inches + 1 sub division (1/10)
What is 875 inches on a tape measure?
875/12 = 72 feet 11 inches
What would .25 inches be on a tape measure?
A quarter of an inch.
How much is 0.04 inches on a tape measure?
43
What is 29.87 inches on a tape measure?
What is 29.87 in on a tape measure
What is the unit of tape measure?
You can get tape measures that are graduated in centimetres or inches.
What is 2.2 inches on a tape measure?
On a tape measure, 2.2 inches would be the distance measured from the starting point on the tape measure. Each inch on a tape measure is typically divided into smaller increments, such as eighths or sixteenths of an inch, allowing for precise measurements. In this case, 2.2 inches would fall between the 2-inch mark and the 3-inch mark on the tape measure, indicating a measurement slightly over 2 inches.
How many inches on a tape measure?
The number of inches is printed on its case.
What is 2.290 inches on a tape measure?
You will not be able to measure to that accuracy using a tape measure. You should have marks at tenths of an inch and so you will get 2.3 inches on the tape measure. If you have a tape measure that has divisions to 1/32 of an inch then 2 and 10/32 is the nearest.
What does 1250 inches look like on a tape measure?
It is unlikely that a tape measure will extend that long, but 104.166... feet.
How do you read 2.10 inches on a tape measure?
The inches need to be divided into tenths on the tape Then its 2 inches + 1 sub division (1/10)
What is 2.65 on tape measure?
On a tape measure, 2.65 would typically be interpreted as 2 feet and 7.8 inches. This is because each foot on a tape measure is divided into 12 inches, so the decimal point represents a fraction of a foot. In this case, the .65 would be equivalent to 7.8 inches.
How many centimeters in 1 tape measure?
The length of a tape measure can vary, but a standard tape measure is typically 150 centimeters or 60 inches long.
How many inches does 22.0 cm equals in inches?
With a ruler or tape measure. It is 8.625 inches
What is 158 inches converted into feet and inches?
Look on a tape measure, 13' 2"
What is 875 inches on a tape measure?
875/12 = 72 feet 11 inches
