0
What else can I help you with?
How many amps equal 50 ma?
50 milliamps (mA) is equal to 0.05 amps.
How much is 50 miliamps?
50 milliamps is equal to 0.05 amps.
Is a cells resting state -50 to about 50 millivolts?
No, a cell's resting membrane potential is typically around -70 millivolts. This negative charge inside the cell is maintained by the sodium-potassium pump, which pumps sodium out and potassium in, creating a voltage difference across the cell membrane.
How many amps in a 50 watt 12v light?
Amps = Watts/Volts55/12= 4.583333
Does 50 amps rated at 240 volts equal 100 amps rated at 120 volts?
When you multiply amps x volts the product is watts. Using this formula W = Amps x Volts should give you your answer.
How many amps equal 50 ma?
50 milliamps (mA) is equal to 0.05 amps.
What does 24vac 50va equal to in amps?
In 50 VA the V stands for volts and the A is for amps. Hence the formula you are looking for is 50/240 = Amps.
How much is 50 miliamps?
50 milliamps is equal to 0.05 amps.
Is a cells resting state -50 to about 50 millivolts?
No, a cell's resting membrane potential is typically around -70 millivolts. This negative charge inside the cell is maintained by the sodium-potassium pump, which pumps sodium out and potassium in, creating a voltage difference across the cell membrane.
How many amps does 50.000 watts equal?
There are zero amps in 50 watts. The equation for amperage is, I W/E. Amps = Watts / Volts. As you can see if there is no voltage stated the amperage can not be calculated.
How many amps in a 50 watt 12v light?
Amps = Watts/Volts55/12= 4.583333
Does 50 amps rated at 240 volts equal 100 amps rated at 120 volts?
When you multiply amps x volts the product is watts. Using this formula W = Amps x Volts should give you your answer.
How do you convert a 50 micro-amp DC meter to a 100 milli-amp meter?
with a resistor 300K in series with the 50 micro amperes DC meter
How many amps per leg can you pull on a 50 amp 3 phase connector?
On a 50 amp 3 phase connector, you can pull 50 amps per leg. This means that each of the three phases can carry up to 50 amps individually, resulting in a total capacity of 50 amps per leg.
What is the Max amps for 6 gauge?
50 amps
What is type of breaker for 41 amp's?
For a 41 amp load, you would typically use a 50 amp circuit breaker. The general rule is to select a breaker size that is 125% of the continuous load amps or equal to the load amps if it is not a continuous load. In this case, 41 amps is considered a continuous load, so you would round up to the nearest available breaker size, which is 50 amps.
How do you convert 0.025 g to 50 mg?
You can't convert 0.025 g to 50mg. Gram is the base unit. Milli is a prefix meaning 1/1000. So 0.025 g is equal to 25 mg, or 50 mg is equal to 0.050 g.
