Best Answer

since one inch = 12 feet and this is a square dimension multiply by 12 x 12 = 144 to get area in square feet. 60 x 144 = 8640 square feet

Lvl 1

but what is the answer?

More answers

It is 8640 square feet.

Q: What is the actual area of a restaurant if the area is 60 inch2 using a scale of 1 inch to 12 feet?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

this is a 2 part answer, 1) your scaled factor is determined by the your map size, a "To" scale drawing is a percentage of the actual size of the object being drawn on the map 2) using autocadd for most drawings and draft's you typically draw the object at a 1:1 ratio, then apply the desired Scale (or scale factor) to fit the the desired paper size

Scale Factor

its got to be by using the linear scale

pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.

It depends on the scale that you are using.

Related questions

To find the actual distance between two points on Earth using a graphic scale, measure the distance between the two points on the map using the scale provided. Convert this measurement to actual distance by using the ratio scale (e.g., 1 cm = 100 km) provided on the map. Multiply the measured distance by the ratio to find the actual distance between the two points on Earth.

To find the actual size of a specimen, you need to use a known scale bar that is provided on the image. Measure the pixel length of the scale bar using image processing software, and then convert this pixel length to real units using the calibration information provided. This calibration will allow you to determine the actual size of the specimen in the image.

The "scale of miles" on a map using the English distance units is the ratio of indicated distances to actual physical distances. e.g. 1 inch = 1 mile

To measure distance using a topographic map, you can use the map's scale. First, determine the scale of the map, such as 1:24,000. Then, use a ruler to measure the distance on the map between two points that you want to calculate the actual distance for. Convert the measured distance on the map to the actual distance using the map scale.

A scale is used to convert between distances on a map and actual distances in real life on a planimetric map. The scale provides a ratio or proportion between a distance on the map and the corresponding distance in reality. By using the scale, you can accurately measure distances on the map and then convert them to real-world distances.

The scale factor M is used to convert the measurements on the scale to the actual distances. By multiplying the measurement on the scale by the scale factor M, you can find the true distance in meters. This allows you to accurately measure distances using a scaled-down representation on the map or drawing.

A scale map is a map that shows a small amount of area in detail using a smaller scale. For example, a map of a city may be drawn at a 1:10,000 scale, meaning that 1 cm on the map represents 10,000 cm in the actual city. This allows for a detailed representation of streets and landmarks.

The map scale indicated that 1 inch on the map represented 10 miles in real distance. The map scale helped us calculate the actual distance between two points on the map. It is important to always check the map scale before using the map for navigation to ensure accurate measurements.

A scale strip is a small ruler with varying units that represents the proportion between a distance on the map and the actual distance on Earth. By using the scale strip, you can measure distances on the map accurately by aligning it with the map's scale and converting the measurement based on the scale ratio provided.

A scale of miles is a graphic representation used on maps to show distances between different locations. It is typically represented as a line or bar with markings indicating the specific distances on the map corresponding to actual distances on the ground.

A verbal scale is a type of scale used in maps to convey distance using words instead of numerical measurements. It typically takes the form of a statement, such as "One inch equals ten miles," to help map users understand the actual distance represented on the map.

this is a 2 part answer, 1) your scaled factor is determined by the your map size, a "To" scale drawing is a percentage of the actual size of the object being drawn on the map 2) using autocadd for most drawings and draft's you typically draw the object at a 1:1 ratio, then apply the desired Scale (or scale factor) to fit the the desired paper size