A unit of angular measure equal to the angle subtended at the center of a circle by an arc equal in length to the radius of the circle, approximately 57°17'44.6"
Assume the measurements are in feet. Then the area of two opposite sides (say front and back) = 2 x 57 x 44.5 = 5073 sq ft The area of two other opposite sides (say top and bottom) = 2 x 57 x 50 = 5700 sq ft The area of the remaining sides (left and right) = 2 x 44.5 x 50 = 4450 Total area of material required = 5073 + 5700 + 4450 = 15223 sq ft. NOTE : If the dimensions are in inches then the total area = 15223 ÷ 144 = 105.72 sq ft.
He paints 264 square feet.
57
If the area of a square is 49 square centimeters, the length of each of its sides are: 7 cm.
To find the radius of a circle with a given circumference, you can use the formula: circumference = 2 * π * radius. Given that the circumference is 57 ft, you can plug this value into the formula: 57 = 2 * π * radius. Solving for the radius, you get radius = 57 / (2 * π) ≈ 9.07 ft. Therefore, the radius of the circle is approximately 9.07 feet.
Area: 43*57 = 2451 square feet Perimeter: 43+57+43+57 = 200 feet
Well, honey, to find the area of a circle, you use the formula A = πr^2. Since the diameter is 8.5 inches, the radius is half of that, which is 4.25 inches. Plug that into the formula, and you get an area of approximately 56.77 square inches. Math doesn't lie, darling.
1,710 square feet. Multiply length by width - the result is the area in square feet.
Area of 57 foot diameter circle:Area = pi * (d/2)2 = 3.1416 * 28.52 = 3.1416 * 812.25 = 2551.76 square feet
The pallet's area is about 12.07 square feet.
Multiply the two dimensions to get the area. In this case the calculation gives you 855 square feet.
It is: 57*3 = 171 feet
Something measuring 48 feet by 40 feet by 57 feet will have a volume of 48 x 40 x 57 = 109440 cubic feet.
5.7 feet = 1.73736 meters.
Answer: 57 inches = 4.75 feet OR 4 feet 9 inches.
If the dimensions are in feet then: 57*96 = 5472 square feet