120 cm cubed
120
120/200 = 3/5 = 0.6 g/cm3
The volume of the pipe is 10 feet X the cross section area. Assuming that the 2 inches is the interior diameter, you have a one-inch radius. Area(cross section) = pi(1 inch)2 = pi square inches volume = 10 feet X pi square inches = 120 inches X pi square inches =120pi cubic inches. since 1 liter = 1000 cubic centimeters, we need to convert cubic inches to cubic centimeters 1 inch= 2.54 cm, so 1 cubic inch = 16.37064 cubic centimeters. Volume = 120 pi in3 = 120 X 16.37064 X pi cm3 = 6177.7775851566925854545518477173 cm3 (Dividing by 1000) = 6.1777775851566925854545518477173 Liters Round as you see fit.
1 meter is 20 centimeters shorter than 120 centimeters.So the answer to the question is: Negative 20 centimeters.
120 cm cubed
120
120/200 = 3/5 = 0.6 g/cm3
The density of mercury is about 13.6 grams per cubic centimeter. So, 120 grams of mercury would occupy approximately 8.82 cubic centimeters of volume.
120 yards = 10,972.8 centimeters.
120 centimeters = 12 decimeters (10 centimeters + 1 decimeter)
It means if there are 120 units that are one centimeter in width, length, and height inside the figure. It would mean that if you put the figure into a basin full of water (any bit more will let it overflow), 120ml (120cc) of water will flow out (unless it absorbs water)
There are 12 centimeters in 120 millimeters. This conversion is based on the fact that 1 centimeter is equal to 10 millimeters. So, 120 mm divided by 10 mm/cm equals 12 cm.
One meter is 100 centimeters, so 120 centimeters is 1.2 meters.There are 100 centimetres in one metre. Therefore, 120 centimetres is equal to 120/100 = 1.2 metres.
120 centimeters is equal to 47.24409 inches.Answer, in case you need to show your work:120 cm*1 in2.54 cm=47.24 in120 centimeters is 47.24 inches.
1 centimeter = 10 millimeter So, 120 millimeters will be (120/10) 12 centimeters.
1 inch = 2.54 centimeters. 120 centimeters = 47.24 inches. This is almost 4 feet.