8
A number sentence is a mathematical equation, such as 2x6+5x4=32.
It seems there may be a typographical error in the equation you provided. If you meant the equation in the form ( y = 2x + 6 ), the slope is 2. This means that for every unit increase in ( x ), ( y ) increases by 2 units. If the equation is different, please clarify for an accurate response.
It is equal to to 72 because 2x6=12 and 3x2=6 and 12x6=72 or if you think this is to complicated, you can do 2x6=12, 12x3=36, and then 36x2, which then also gives you 72
I would use substitution. Turn the second equation into y=8-2x, put it into the first and solve for x. Then put x into one of the equations and solve for y.So...2x-3(8-2x)=24 --> 2x-24+6x=24 --> 8x=48 --> x=6y=8-(2x6) --> y=8-12 --> y=-4
The dead load capacity of an 8' 2x6 lying flat can vary based on factors such as the type of wood, spacing, and load distribution. Typically, a 2x6 can support roughly 40-50 pounds per linear foot when properly supported. Given the specific configuration of the supports and load bearing points, you can expect the 8' 2x6 to hold approximately 320-400 pounds total, but it's essential to consult with structural engineering guidelines for precise calculations. Always consider safety factors and local building codes when determining load capacities.
A number sentence is a mathematical equation, such as 2x6+5x4=32.
A nominal 2x6 baord is actually 5.5" wide. 5.5"/12"=0.45833ft => 0.45833ft x 300ft = 137.5 sq-ft
12
It seems there may be a typographical error in the equation you provided. If you meant the equation in the form ( y = 2x + 6 ), the slope is 2. This means that for every unit increase in ( x ), ( y ) increases by 2 units. If the equation is different, please clarify for an accurate response.
The weight a 8-foot 2x6 can hold depends on several factors, including the type of wood, the load type (live or dead), and how it's supported. Generally, a 2x6 made of structural lumber can support around 50 to 100 pounds per linear foot when properly supported. Therefore, an 8-foot 2x6 may hold approximately 400 to 800 pounds under ideal conditions, but it's essential to consult structural engineers or building codes for specific applications.
The weight of pressure-treated lumber, specifically a 2x6 board, typically ranges from about 2.5 to 3.5 pounds per linear foot, depending on moisture content and the specific treatment process used. For a standard 8-foot 2x6, this translates to approximately 20 to 28 pounds. The weight can vary slightly based on the type of wood and the level of treatment. Always check with the supplier for specific weights relevant to your project.
Evation: n+7-(2x6) Answer: 0
The maximum span allowed for 2x6 ceiling joists according to the 2x6 ceiling joist span table is typically around 12 feet.
A 2x6 piece of lumber can typically support around 50 pounds per linear foot when used as a horizontal shelf. The actual weight it can hold will depend on various factors such as the type of wood, the length of the span, and the load distribution. It is always best to consult with an engineer or construction professional for specific load-bearing calculations.
It is equal to to 72 because 2x6=12 and 3x2=6 and 12x6=72 or if you think this is to complicated, you can do 2x6=12, 12x3=36, and then 36x2, which then also gives you 72
I would use substitution. Turn the second equation into y=8-2x, put it into the first and solve for x. Then put x into one of the equations and solve for y.So...2x-3(8-2x)=24 --> 2x-24+6x=24 --> 8x=48 --> x=6y=8-(2x6) --> y=8-12 --> y=-4
The dead load capacity of an 8' 2x6 lying flat can vary based on factors such as the type of wood, spacing, and load distribution. Typically, a 2x6 can support roughly 40-50 pounds per linear foot when properly supported. Given the specific configuration of the supports and load bearing points, you can expect the 8' 2x6 to hold approximately 320-400 pounds total, but it's essential to consult with structural engineering guidelines for precise calculations. Always consider safety factors and local building codes when determining load capacities.