2.0
2
The larger thread spacing has 2 disadvantages: It is not a strong since it has less effective area; and if you are using to precisely locate something there is less precison per turn.
If the two resistors are in series, then the larger one is 2 ohms.(The smaller one is 1 ohm. Their combined series total is 3 ohms. 9/3 = 3 amps.)If the two resistors are in parallel, then the larger one is 9 ohms.(The smaller one is 4.5 ohms. The combined parallel total is 3 ohms. 9/3 = 3 amps.)
It can be one step down in size, 3/4 to 1/2 or a larger jump, 4 inch to 2 inch. Depends on the location and what you are wanting to do.
Depends on the system Pumped discharge can be as small as 2" diameter Gravity drainage no smaller then 3" or larger then 4"
Inductor impedance is given by jwL, where w=2*pi*frequency. Therefore as the frequency increases the impedance of the inductor increases, causing a larger current flow and a larger power dissipation across the inductor
.8 is larger than .76
No 0.08% is not larger than 0.59%
.08 is larger
8 kilograms would be the same as 08 kilograms. The 0 in front of the 8 is insignificant.
No, .08 is 8 times larger
2/3 is larger
What is the larger of the 2 divisions of Islam
2 is larger than 1.4 is.
2/3 is larger than 2/8
Yes, 2.09 is larger than 2.
2/6 is larger.
No 2 is the larger bit/head