Its mean incomplete data or the data upon which we can not rely totally.
what do you mean by data handling define mean mode median
An outlier does affect the mean of the data. How it's affected depends on how many data points there are, how far from the data the outlier is, whether it is greater than the mean (increases mean) or less than the mean (decreases the mean).
Mean = a + [
In the normal distribution, the mean and median coincide, and 50% of the data are below the mean.
A data controller is a person who controls the data.
How data encrypt and decrypt from PC to PC using micro controller?
Controller area network(can) data bus, high speed bus(-) shorted to data bus(+) in short you have a fault in ur system
The responsibility under the Data Protection Act lies with the data controller, who determines the purposes and means of processing personal data, and the data processor, who processes data on behalf of the data controller. Both are responsible for ensuring compliance with the principles and requirements of the Act.
Metadata cleanup is used to remove the records and data of an crashed Domain Controller or an unsuccesful demotion of a Domain Controller. It is executed on a working domain controller using ntdsutil.
DQS = data strobe. When data is read from DRAM using the DQ pins, DQS is asserted so that memory controller can use that to read data. When memory controller writes to DRAM, it asserts DQS when DQ pins have the data to be written.
I am assuming you mean North Bridge\ South bridge North Bridge is the Memory Controller, that transfers data and instructions between the CPU ,RAM and PCIe Devices. South Bridge is the Storage Controller that controls how data is transferred onto Storage Devices(Hard drives)
It is the structure that must be maintained in the processor which helps the data to be routed over different registers to perform low level activities (RTL activities). Typically data paths are set by data path controller which generally creates micro word that in turn contains the data path.
Tunnels wireless client data and AP control traffic between the AP and the controller
Orginal controller
No controller in port mean your controller is either defective, or broken. You will require to replace the device in order to solve this problem.
it is used to control the carry the data on bus cable