Efficiency is typically calculated as the ratio of actual output to maximum possible output, expressed as a percentage. The formula for efficiency is: Efficiency = (Actual output / Maximum possible output) * 100%.
3MHz
maximum obtainable output
The maximum power of a class 2 power can be between 40-50v. You should always make sure you are aware what is the maximum output for your electronics.
In natural frequencies the output of the system will be less than the maximum level. In the resonance frequency the output of the system will be the maximum level.
capacity
According to the datasheet the output on pin 1 of that transistor is a maximum 4.5 volts
Effective capacity is the maximum theoretical output of a stemming a given period under ideal conditions.
when all the resistance removed from the circuit
i beleve it is 12 volts
the circuit which has the maximum power output
Clipping occurs in the voltage waveform when the input voltage, multiplied by the voltage gain of the op-amp circuit, exceeds the op-amp supply voltage as limited by the output network. The supply voltage and output network, limits the maximum voltage that can be achieved at the output. The op-amp behaves normally within its range of maximum voltage output, and then it is clipped when it reaches the maximum voltage of the circuit.