answersLogoWhite

0

10 * sine(9) = 1.5643

A stack of this height could be made with 1.000, .350, .114 and .1003 blocks for the minumum number of blocks.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Trigonometry
Related Questions

Which parts of earth are most similar to the plate with an axis angle of 0 degrees?

South America


Where is the vehicle identification number on an engine from a 2000 Dodge intrepid?

The vehicle identification number on a 2000 Dodge Intrepid motor is found etched into the block at the oil sump plate. This oil sump plate sits at a 45 degree angle to the block.


Why glass plate in newton 's ring experiment is inclined at 45 degrees?

The glass plate in Newton's ring experiment is inclined at 45 degrees to avoid interference effects caused by reflections from the two surfaces of the glass plate. At this angle, the reflections from the top and bottom surfaces of the glass plate exhibit a relative phase difference of 180 degrees, which cancels out interference effects, allowing for clear observation of the interference fringes.


What is the slope of a baseball mound in degrees?

The pitcher's mound is 10 inches off the ground when compared to home plate. The distance between the pitcher's mound and home plate is 60 feet, 6 inches or 726 inches. We can use these to formulate a triangle where the triangle's base is 726 inches and its height is 10 inches, with an unknown hypotenuse length. We assume the triangle to be a right triangle at the pitcher's mound on the ground, and an angle of elevation (a) at home plate. Using the Pythagorean theorem, we find that the length of this triangle's hypotenuse is 726.06886 inches, and using the law of sines, we find that the angle of elevation of the pitcher's mound from home plate is 0.78914 degrees.


What angle is home plate measurements?

There are three 90 degree angles. (Looking at home plate from a "pitcher's viewpoint), the wide "front" of home plate has 90 degree angles on both sides. The back point, e.g. "the heart of the plate," is also a 90 degree angle. The two angles closest to the batter's back foot are both 135 degrees. This is because these angles are the sum of a 90 degree angle and a 45 degree angle. The back "triangle" of home plate is a 45-45-90 triangle. Hope this helps.


What are the angles of a home base?

There are three 90 degree angles. (Looking at home plate from a "pitcher's viewpoint), the wide "front" of home plate has 90 degree angles on both sides. The back point, e.g. "the heart of the plate," is a 90 degree angle. The two angles closest to the batter's back foot are both 135 degrees. This is because these angles are the sum of a 90 degree angle and a 45 degree angle. The back "triangle" of home plate is a 45-45-90 triangle.


What does plate block mean in stamp collation?

A plate block is a block of stamps from the edge of the sheet which shows the plate or cylinder from which the stamps were printed.


What factors might influence the descent angle of a subducted plate?

The composition and density of the subducted plate, as well as the angle of subduction and presence of any obstacles in the subduction zone, can influence the descent angle of a subducted plate. Water content in the subducted plate can also affect its descent angle due to changes in the plate's buoyancy. The surrounding mantle flow and temperature conditions can further influence the descent angle of the subducted plate.


Why would an artist cancel a plate or block?

An artist may cancel a plate or block if they are unsatisfied with the results of the print, if there are technical issues with the plate or block, or if they have changed their mind about the image they want to create. Cancelling a plate or block allows the artist to prevent any further prints from being made and start fresh if needed.


Which parts of earth are most similar to the plate with an axis angle 80?

A tectonic plate with an axis angle of 80 degrees is likely oriented steeply, similar to subduction zones where one plate is being forced beneath another. Regions like the Pacific Plate, particularly along the Japan Trench or the Aleutian Trench, display such steep angles. Additionally, the boundary between the Nazca Plate and the South American Plate also exhibits similar characteristics due to the subduction process. These areas are characterized by significant geological activity, including earthquakes and volcanic activity.


What plate is arenal on?

The volcano Arenal is on the South American plate. It is an explosive volcano, stratovolcano ,active ,a national park in Costa Rica, and has killed about 87 people. Arenal produces block rocks and ballistic blocks. Volcanic action from Arenal are hot springs and the longitude and latitude is 10.4633 degrees N and 84.7033 degrees W.


Can someone please tell me we use a drill vice and what are the health and safety procedures and also for the following lever clamps angle plate vee block and clamp?

cn sum1 please help me thanx