0
The slope triangle on an elevation drawing is typically located adjacent to the slope itself, illustrating the angle of the incline. It is often positioned at the base of the slope or at the point where the slope meets a horizontal line, clearly indicating the rise and run. This graphical representation helps in understanding the grade of the slope in relation to the horizontal plane.
What else can I help you with?
What would the slope-intercept form be of a line with a 0.25 slope and an x-intercept of twenty-four?
slope intercept formula is given by y = mx+c where m is the slope and c is the x intercept so ur equation comes to... y=(0.25)x + 24
How much slope per foot toilet drain?
All drains slope 1/4 inch per foot, minimum. Too much slope,though, can mean pulling water out of the trap or goose neck on a toilet.
What is the maximum slope of a toilet drain?
The maximum slope of a toilet drain should typically be between 1% to 2%, which translates to a rise of 1 to 2 inches per 10 feet of horizontal run. This slope ensures proper drainage while preventing clogs. A slope that is too steep can lead to issues with waste not being fully transported, while a slope that is too gentle may cause slow drainage and buildup. Always refer to local plumbing codes for specific requirements.
How much slope does flat roof need?
1" per 4' minimum.
What is the slope of the line passing through points A 54 and B03?
thanks you for your help
What is the slope of a 45 degree triangle?
The slope for a 45 degree slope triangle is 1/1 because the slope triangle is an isosceles right triangle.
How close the contour lines are is an indication of an area's?
elevation
How do you find the slope of a line on a xy coordinate plane?
Form a right angle triangle under the slope and divide the base of the triangle into the height of the triangle.
How do you find the base of a triangle if you know height and slope?
You cannot since the information is not sufficient. Furthermore, a triangle does not normally have a slope.
What is the definition of slope triangle?
A visual tool that helps you find the slope of a line.
How do you convert slope into feet?
To convert slope into feet, you need to understand that slope is often expressed as a ratio or a percentage. For example, a slope of 10% means that for every 100 horizontal feet, the elevation changes by 10 feet. If you have a slope ratio (like 1:10), it indicates that for every 10 horizontal feet, the elevation changes by 1 foot. To convert this into feet, simply multiply the horizontal distance by the slope ratio to find the vertical change in elevation.
If you were traveling from Colorado to Alabama would your elevation be increasing of decreasing?
It would be decreasing because alabama is located on a slope. Therefore, u would be trveling donward.
How do you find a slope of a triangle?
In a triangle there are three angle.So, the side opposite to the greatest angle will be greatest side in the triangle and hence it will be the slope of the triangle. you can find slope of any side of the triangle by finding tangent of the angle made by it to the horizontal side eg. place one side of the triangle horizontally. to find the slope of any side A, drop a normal from the apex to intersect the imaginary horizontal line.measure the length(l1) of the normal. measure the distance (l2) between the intersecting point and other end of side A. l1/l2 will give you the slope of side A.
What kind of slope does close contour lines on a topographic map show?
elevation. the closer the lines the steeper the slope.
A measure of the change in elevation over a certain distance?
This would be the slope or the gradient.
What are the 3 things that can be determined by topography?
Topography can determine the elevation, slope, and relief of a landscape. Elevation refers to the height above sea level, slope indicates the steepness of the land surface, and relief is the variation in height within a specific area.
What are two lines that do not intersect and have the same slope?
triangle
