Not enough information to pin it down. There are millions of ways to do it and satisfy the rules you gave us. Here are some sets of 3. In each set, the 3rd is 30 more than the first, and all 3 add up to 62. 1 -- 30 -- 31 2 -- 28 -- 32 3 -- 26 -- 33 4 -- 24 -- 34 5 -- 22 -- 35 etc. etc. etc.
first piece is 18 inces second is 22 inches third is 24 inches
First of all we need to know what the 16 x 4 area is. is it yards, metres, inches or what. What size are the pieces of turf?
An example: Feet for first piece of fabric: 2 Inches for first piece of fabric: 7 Feet for 2nd piece of fabric: 2, Inches for 2nd piece of fabric: 6 I need the program to print: Feet: 5 Inches: 1
The first one.
3x + 12 + x = 21
first piece is 18 inces second is 22 inches third is 24 inches
Assuming the two end pieces will also be 10 inches and the cuts do not take up any space, the board must be 130 inches long. But it could be only 122 inches if the first and last cuts are only 1 inch from the ends, but still 10 inches from the adjacent cuts. Or it could be any longer length if either or both of the ends is more than 10 inches.
Backgammon is a two-player board game played on a unique backgammon board. The players roll the dice to move their playing pieces around the board and eventually off the board. Whoever is able to remove all pieces from the board first wins.
A board foot is 12 inches by 12 inches by 1 inch thick. A board 6 inches wide, 24 inches long and 1 inch thick is still 1 board foot. Any combination of the three measurements that add up to the first, 12x12x1 is considered 1 board foot.
2nd because you have some pieces on the board to work with.
Cubic board feet is not a term used in the lumber industry, but it's obvious that a cubic foot is a cube that is one foot on an edge. A board foot, which is a common term used in the lumber industry is a piece of wood that is twelve inches wide, one inch thick and one foot long. Ten board feet would be a board one inch thick, twelve inches wide and ten feet long. (And no, a board doesn't have to be 12 inches wide. If it's 6 inches wide and 2 inches thick and one foot long, there is still one board foot of material there.) To make a cubic foot of wood, one might take one board foot of wood (12"x12"x1") and put it down, then stack another eleven pieces just like it on top the first one. That's 12 pieces of wood that are 1" thick for a total of 12" in height, and which are 12"x12" (length and width) giving us a volume of wood that is 12"x12"x12" or one cubic foot.
1300 b.c., It's a wood board with pieces made of rock found in Israel.
First of all we need to know what the 16 x 4 area is. is it yards, metres, inches or what. What size are the pieces of turf?
The first games played on a board were made many thousands of years ago; Checkers is an ancient game, for example. The Egyptians, too, had a game played with various pegs in a board (how it is played, we no longer know).
Yes it's 9 feet 36 of them (inches) each yd, first inches, then feet (12 inches) than yards (3 ft/36 in each)
5,12,13
Hz