0
A model truck is 18 point 5 inches long and 7 point 5 inches wide The original truck was 12 feet long How wide was it?
Wiki User
∙ 13y ago
12ft times 12= 144 inches
in perspective
144/18.5= x/7.5
so 144 times 7.5= 1080 and divide by 18.5, gives you 58.3783...
divide by 12 to go back into feet, and the answer is 4.864
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
The underpass of a bridge is marked 13 feet 6 inches high. The actual clearance is 14 inches higher. A truck is 14 feet 2 inches tall. How much space is there between the top of the truck and the top?
Marked: 162 inches Actual: 176 inches Truck: 170 inches Clearance: 6 inches
How many miles per gallon does a dodge ram truck get?
Depends on the model, and year which you fail to list.
Can you lift a truck 12 inches with just blocks?
Can and should are very different. Lifting a truck changes how the truck handles and performs, destroying the carefully designed balance of the truck. While it may be possible to lift it a foot, it will require changes to the drive train, steering, and brakes (at least), and should not be attempted without some very experienced help.
How many mlb baseballs which have a diameter of 9 to 9.5 in would fit into a truck container measuring 301.5 inches L x 96.99 inches W x 105.04 inches H?
The question is supposed to say circumstance of 9 to 9.25 inches. The diameter is 2.8647 of a 9" ball and 2.9443 of a 9.25" ball.
What is the height of a 40 x 48 pallet?
The height of a pallet is such that a pallet truck or forklift truck can put their blades underneath and lift the pallet. From memory it could be between 6" to 9" high measuring from the ground.
Ground clearance of a semi truck?
depends greatly on the model and where you take the measurement. lowest point generally is 10-15 inches
A scale model truck is 1.5 inches high if the actual truck is 9 feet high what is the scaling factor of the model?
1 to 6 or u can write it as 1:6
What was the original sticker price of the 2008 Peterbilt semi truck model T600?
Peterbilt never made the T600. The T600 was built by Kenworth, and it ended production in 2007, at which point it was replaced in production by the T660.
What was the original tire size for the 1989 Chevrolet Truck Model 1500 2WD?
I have a 1989 2500 4wd and it takes 245/75/R16. These are the original tires.
What size is a V6 engine in f-150 XL truck 2001 model?
4.2 liter ( 256 cubic inches )
What is the wheel base of a standard dump truck?
There is no such thing as a "standard" dump truck. Generally speaking, wheelbases can range from under 200 inches (single axle vehicle) to over 350 inches (at this point, you'd be getting into quints and centipedes).
Do they make mattress in 45 inches wide?
I know some truck campers have mattresses that are 45 inches wide but I do not know what they are referred to as. S and S Camper Co. in Kalispell, Montana has put them in some of their earlier model truck campers like the short ones that will fit on a Toyota Tacoma truck bed.
Can you put newer model truck parts on a older model truck?
Sometimes.
The underpass of a bridge is marked 13 feet 6 inches high. The actual clearance is 14 inches higher. A truck is 14 feet 2 inches tall. How much space is there between the top of the truck and the top?
Marked: 162 inches Actual: 176 inches Truck: 170 inches Clearance: 6 inches
What is original tire size for 1957 gmc truck?
Gonna need more info. They had many trucks. Give us the model and gross vehicle weight.
What are the options on a 1990 Chevy truck?
depending on model of truck.
What are the ignition point gap settings for a 1973 Chevy 350 engine?
a 1973 Chevy truck has HEI Answer And if it does have points, say not the original engine, its .018-.019 will do.
