V = 45 cubic feet
V = L x W x H
L = W for a square base
L = W = 3 feet
45 cubic feet = 3 feet x 3 feet x H
H = 45/9
H = 5 feet
45 cubic feet = 3 feet x 3 feet x 5 feet
a cubic meter measures volume. (ex. how much water in a cylinder.)
23,000 gallons of water is equal to 3,693 cubic feet.
question is meaningless. gallon is a unit of volume, sq ft is a unit of area. the above is a horrible answer. simply put your question was miss worded. i believe you meant cubic foot (not square foot). the answer is 7.481 gallons in a cubic foot
"Square cubic foot" or feet doesn't make sense. Either you have square feet, or cubic feet.
Cubic metres or litres.
For General.A (gallon) is a fluid measurement, and a (cubic foot) is a volume measurement. So to measure a gallon, you need to measure the square in. of container (use container that measures the same square in. from bottom to top), then pore in one gallon of any liquid and measure the hight it comes; multiply this by square in. of container and you have your cubic inches in that gallon. For Water.One gallon equals 0.134 cubic feet. This is granted that the water remain at constant temp., and at a point to have the stated volume.
Water has a density of 1 gram per cubic centimeter. There are 1,000,000 cubic centimeters in a cubic meter, so 1 cubic meter has a mass of 1000 kilograms.
Square inches of water is not measurable. The question must be in cubic inches of water in order to give a third dimension to the water. Width X length X depth = cubic size of water you wish to weigh.
600 cubic feet.
Sorry, you can only convert 1 metric ton of water to cubic meters (not square meters). Square meters are an area and cubic meters are a volume.
There are no gallons of water in a square foot. Gallons is a unit of volume, and square feet is a unit of area, not volume. If you are asking about cubic feet, however, the answer is there are about 7.5 gallons in a cubic foot.
The amount (volume) of water is measured in gallons or cubic feet.