Yes, all recessed lights have thermal protection, normally a bi-metal thermal overload. They must be to receive a U.L., (Underwriters Laboratories) approval sticker and be allowed to be sold in the U.S. The overload works on heat, not current, so that if you say put a 200 watt lamp into a fixture rated for 60 watt maximum, the overload will overheat and open the circuit.
Recessed lights would be considered a penetration in the fire rated system.
Yes. I am assuming this is a residential question. A better answer is...if the 8 recessed lights draw fewer than 16 amps together, it is good.
Yes you can, that is the easy part, you have to close the opening from 6 inches to 4 inches.
Yes, you can.
See View Discussion below.
No. If you will have insulation around a can, make sure it is thermally protected.
There is no code limitation for the height distance for recessed lights.
No, the fluorescent fixtures that are installed in dropped ceilings are also know as recessed lighting.
Well, it depends on the size of your kitchen and the watt of the recessed light. But I think if you choose LED recessed you don't have to own many of them. For my kitchen, I only use 6 of LED recessed lights.
Recessed lights would be considered a penetration in the fire rated system.
no difference
form_title= Recessed Lighting form_header= Brighten up your home with recessed lighting. Do you currently have recessed lights?*= () Yes () No How many rooms do you want recessed lights installed?*= {1, 2, 3, 4, 5, More than 5} When do you want this project completed?*= _ [50]
Yes. I am assuming this is a residential question. A better answer is...if the 8 recessed lights draw fewer than 16 amps together, it is good.
That depends on the usage of the room and the recessed lights you have selected. Some rooms, like bathrooms, need more light while others, like closets do not.
Yes you can, that is the easy part, you have to close the opening from 6 inches to 4 inches.
Yes, you can.
Thermally protected MOV (TMOV) is a new patent technology in the field of surge protection. TMOV is a fail-safe device, which integrated a disk varistor and a thermal fuse in a single package. The thermal fuse is designed to disconnect the MOV from the circuit, in case of MOV's failure. Because MOV might thermally run away due to the increasing leakage current, or burn and burst in the event of a short-circuit fault.