answersLogoWhite

0


Best Answer

Yes. Assuming everything is wired correctly and your 30 amp AC cord is compatible with your 50 amp plug, you can do this. I think you will find, however, that your 50 amp plug has a different pin configuration than your 30 amp cord end. This is not easily resolved because there are serious dangers in going the other direction, plugging a 50 amp appliance into a 30 amp receptacle.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can I plug a 30 amp air conditioner in a 50 amp plug?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Is it possible to power a 30 amp RV air conditioner with a generator with only two 20 amp outlets by combining the two 20 amp outlets to produce one 30 amp?

No, you need a 30 amp breaker (whether that's from a generator or not it doesn't matter) with the proper voltage.


Is a 40 amp circuit breaker ok for a 30 amp air conditioner?

Yes. You should use 8 AWG wire from breaker to AC unit.


Is there an adapter that can be used on 230 volt 30 amp air conditioner appliance to make it fit a 220 volt 20 amp socket safely?

My electrician says no, has to be some rewiring.


Can you plug your motorhome 30 amp adapter into the dryer 30 amp outlet without hazard?

yes


How do I know if I have a 30 amp breaker at my house to plug a trailer into?

If it is a 30 amp breaker then it is a 240 volt outlet.


Can you plug a 120 Volt 30 Amp tanning bed into a 125 Volt 30 Amp outlet?

yes


Can you plug a 15a 250v ac into a 30a 250v plug?

No, the amperage pin configurations are different between a 15 amp and a 30 amp plug.


Is there a adapter for a nema 14-30 plug and a nema 14-50 receptacle?

No there are no adapters made for these types of installations. The reason there are no adapters is to provide a factor of safety. To plug a 30 amp plug into a 50 amp receptacle could allow 50 amps to be applied to a 30 amp rated cord. The 50 amp receptacle is more than likely being fed by a 40 amp breaker. Just change the plug cord to match the ampacity of the breaker ahead of the 50 amp receptacle. Or change the 50 amp receptacle and 40 amp breaker to a 30 amp breaker and use your existing cord plug.


What kind of plug do you need for a 220 30 amp service?

You can do a 30 amp twist lock receptacle 220v 3 wire (nema L6-30R) or a strait blade 30 amp 220v 3 wire receptacle (nema 6-30R) or a traditional 30 amp dryer plug. The nema # is a universal # that everyone uses to identify that plug. Ask for it. The most important part is the 30 amp male that your trying to plug in. Match it up with what you putting in the wall. Use #10 gauge wire for 30 amps


Can you plug in a 125 volt 30 amp plug in a 120 volt 30 amp outlet?

If the plug fits you are good to go. The typical range of residential voltage is from 110 to 125 VAC. You are fine within this range.


How big of a load does a 30 amp plug handle on a 40 amp circuit?

If the overcurrent protection device is 40 Amps, then a 30-Amp plug can overheat and catch fire at 40 Amps before the circuit-breaker blows.


Can you use 6 gauge wire on A extension cord and put 30 amp plugs on it?

If your question is can you use a #6 flexible SOOW cord and put a 30 amp plug on it, then yes. The breaker that feeds the receptacle that the cord will plug into can be no larger than a 30 amp breaker. What limits the cord capacity to 30 amps is the ratings of the plug on the end of the cord.