The correct answer is; that depends entirely on the capacity of the circuit to which you will be connecting the fan.
If the circuit (including switches, circuit breakers, wire size) has sufficient available capacity, connecting the larger fan will not be a problem. Otherwise, it is possible that even such a small increase in power consumption can cause problems with the wiring... depending on the circuit.
That is 10 amp wire.
Yes, no problem whatsoever.
10
For a continuous load the circuit breaker is set 25% higher than the load current. So a 20-amp breaker is used with a continuous 16-amp load.
10 amps is the maximum it will carry.
No, as soon as you turn on the appliance the wire inside the fuse will melt as there will be too muck current flowing through it
That is 10 amp wire.
Engine cooling fan RELAYS are located in the under-hood power distribution box. relays #15 and #16. The FUSES that control these fans are also located in the same box: fuse # 2 (30 Amp) and fuse #6 (50 Amp).
8 amp in all but #9 and #10 , they get 16 amp
12 ga, 20 amp. 14 ga, 15 amp. 16 ga, 10 amp.
Yes, no problem whatsoever.
Provided the equipment draws less than 16 amps it can be supplied from a 16 A plug.
Kacey Boston. She 16 and WATCH HIM.
10
The Fan was released on 08/16/1996.
For a continuous load the circuit breaker is set 25% higher than the load current. So a 20-amp breaker is used with a continuous 16-amp load.
Fan Bingbing was born on September 16, 1981.