No. You need to obtain a cord with 3C #10 wires in it. #10 wire is rated for 30 amps. You will probably not be able to pick this size wire up at a DYI store. Ask an electrician to order you some from the electrical wholesalers.
Use the correct fuse and nothing else.
Circuits cannot be loaded to more than 80% of their rating. So if the wattage rating of the heater is more than 1440 you will need a 20 amp circuit and a 20 amp outlet Be careful what size cord you use. Most lamp cords and extension cords are not large enough to handle this heater. You must use a cord that has 14 gauge wires or larger for 15 amps and 12 gauge wire for 20 amps.
Most branch circuits in kitchens are either 15 or 20 amp. if in doubt use the lower (15) amp fuse.
Yes, the amp rating is a measurement of the highest amp load it should carry. So a 15 amp appliance will work on a 20 amp socket but you wouldn't want to use a 20 amp appliance on a 15 amp socket.
A 15 amp switch can safely handle up to 1400 resistive watts.
Use the correct fuse and nothing else.
Circuits cannot be loaded to more than 80% of their rating. So if the wattage rating of the heater is more than 1440 you will need a 20 amp circuit and a 20 amp outlet Be careful what size cord you use. Most lamp cords and extension cords are not large enough to handle this heater. You must use a cord that has 14 gauge wires or larger for 15 amps and 12 gauge wire for 20 amps.
Most branch circuits in kitchens are either 15 or 20 amp. if in doubt use the lower (15) amp fuse.
Use a 15 amp breaker and 14 AWG wire and all switches and outlets rated at 15 amps or greater.
Yes, the amp rating is a measurement of the highest amp load it should carry. So a 15 amp appliance will work on a 20 amp socket but you wouldn't want to use a 20 amp appliance on a 15 amp socket.
A 15 amp switch can safely handle up to 1400 resistive watts.
The internal metal plates are heavier to handle the extra current. the plates are identical in size and thickness on the 2 i have takein apart,and all i can see is the extra slot on to 20 amp one. A 20 amp receptacle must be fed by #12 wire while #14 is good for a 15 amp. 20 amp cords should not fit into a 15 amp receptacle.
no
15 amp
You can use the wire rated for 20 amps on a 15 amp receptacle but you can not use a 20 amp fuse on any device rated at 15 amps. This is a tricky part of the code about receptacle outlets, You can use a 15 amp duplex outlet on a 20 amp circuit. (duplex outlet two devices can plug in) If it is a single outlet then the outlet must be rated 20 amp. NEC table210.21(B)(3). ============ A 15 amp duplex receptacle can be wired to a 20 amp rated circuit. This means the breaker OR fuse protecting the circuit can be rated 20 amps if the wire is also rated at 20 amps (12 AWG). --Sparkfighter
You should use 14 AWG wiring on all 15 amp circuits.
15 amp breaker.