Look at the wattage capacity of the fixture. Some fixtures are limited to 65 watts, some can take much more. If you use a larger bulb than what the fixture was designed for you create a fire risk. If you need to use a larger bulb but the fixture is limited to 65 watts, you need to change the fixture.
No, it is not alright to replace a 180 watt DLP TV bulb with a 200 watt bulb. You should only use the OEM rated size/wattage for your TV.
120 watt * 36 hr = 4,320 watts
no , it will burn out
To calculate the amperage, you can use the formula: Amps = Watts/Volts. For a 65-watt light bulb at 120 volts, the amperage would be 0.54 amps.
A reptile light is used to generate heat for the reptile, so you must use a bulb that uses 100 watts, and an incandescent bulb is what you need.
You can replace a 60-watt incandescent bulb with a 15-watt fluorescent bulb. This is because fluorescent bulbs are typically four times more energy-efficient than incandescent bulbs.
To calculate the amperage of a 40-watt bulb, you need to use the formula: Amps = Watts / Volts. If the bulb operates at 120 volts (standard for US households), the amperage will be 0.33 amps (40 watts / 120 volts).
Yes, you can replace a 150 watt sodium bulb with a lower 70 watt sodium bulb. However, the lower wattage bulb may not produce as much light as the original 150 watt bulb, so you may experience a decrease in brightness. Make sure the 70 watt bulb is compatible with your fixture and follow all safety guidelines when replacing the bulb.
A 75 bulb will use more electricity.
Yes.
No, you can not use a 150 watt high pressure sodium bulb with a 70 watt ballast.
Most deep freezers use a standard 40-watt appliance bulb. However, I recommend checking the user manual for your specific freezer model to confirm the appropriate replacement bulb size.