Let a = FIRST NUMBER
Let b = SECOND NUMBER
Let c = THIRD NUMBER
Let d = FOURTH NUMBER
Let e = FIFTH NUMBER
a + b + c + d + e = x
Output (print) "x"
1.Start 2. Input a,b,c 3. Sum = a+b+c 4. Average = sum/3 5. Output - Sum,Average 6. Stop
To design a flow chart that computes the average of 5 numbers, you would start with an input symbol for each number. Connect these to a process symbol that adds the numbers together. Then, connect the result to a process symbol that divides the sum by 5 to get the average. Finally, use an output symbol to display the average. This flow chart would involve input symbols, process symbols for addition and division, and an output symbol.
To write pseudocode that accepts five numbers and displays their sum and average, you can follow these steps: Initialize a variable sum to 0. Loop five times to accept input for each number, adding each to sum. After the loop, calculate the average by dividing sum by 5. Display both the sum and the average. Here’s a simple representation: BEGIN sum = 0 FOR i FROM 1 TO 5 DO INPUT number sum = sum + number END FOR average = sum / 5 OUTPUT "Sum: ", sum OUTPUT "Average: ", average END
The sum of the numbers 5, 16, and 22 is 43.
the product of 3 whole numbers is 5. Their sum is 7. what are the numbers
Sum of 5 numbers with an average of 10 = 50
The sum of -5 and 20 is 15. The distance between -5 and 20 is 25. The sum of the numbers between -5 and 20 is 180. The sum of the numbers from -5 to 20 is 195.
The sum of all numbers between 1 and 5 is infinite.The sum of whole numbers between 1 and 5 is 2 + 3 + 4 = 9
The sum of 5 composite numbers can be either composite, or prime, depending on the case.
The sum of the first 5 numbers is 15. 1+2+3+4+5=15
The sum of the first two prime numbers is 5.
Assuming it is an addition sum - in any addition sum such as 5 + 6 = 11, the numbers 5 and 6 are called addends.