0
What else can I help you with?
What amount of kitchen counter requires a receptacle?
No point on a countertop can be more than 24 inches from a receptacle per NEC 210.52. They have to be GFCI outlets per NEC 210.8.
What is the definition of device?
Article 100 of the NEC defines a device as "A unit of an electrical system that carries or controls electric energy as its main function." An example would be a receptacle or switch.an electronic item in witch you can find or read infoOr something that has a particular purpose.
Where in the NEC does it mention In hospitals the conductors of an insulated system in a wet location must be red where a receptacle is used?
It dosen't.
What is receptacle?
A container or devise that holds something A "receptacle" in electrical jargon is what most people call an outlet. The above answer is correct in that it gets its name from the fact it holds something -- a plug. In pure electrical jargon, in the United States, an "outlet" is the box that contains a switch or receptacle or from which a fixture is wired. So when you read the NEC, an outlet is the box, not the device or equipment contained in the box.
Does the NEC code allow a 120 volt receptacle located behind a gas range to be supplied by a small appliance circuit?
Yes
DoesCode permit connecting receptacles to a 20ampere branch circuit using short lengths of 14AWG conductors as the pigtail between the receptacle terminals and the 12AWG branch-circuit conductors?
No. This practice is a violation of Article 210.19 (A) of the NEC. "Conductors of branch circuits supplying more than one receptacle for cord-and-plug-connected portable loads shall have an ampacity of not less than the rating of the branch circuit."
What is the smallest size wire that can be installed in a parallel permitted by the nec?
The National Electrical Code (NEC) permits a minimum wire size of 14 AWG for general lighting and receptacle circuits in parallel installations.
What components can use the NEC BNCACABLE BNC Component Video Adapter?
This cable seems to have little function beyond use in NEC video projectors.It's a male HD-15 VGA connector on one end with a 12" cable connecting to a male 5-wire RGBHV BNC connection on the other end.The latter seems to be only used in NEC projectors..
What percentage of total intermittent device load is added to the continuous duty device load to compute the total system electrical load requirement?
I believe the NEC specifies 125% of the continous load plus 100% of the intermittent load. Depending on the specifics of your situation this may not be correct ( a different part of the NEC should be referenced).
What is the maximum distance from an appliance and the receptacle which serves same appliance?
The maximum distance from an appliance to the receptacle that serves it generally depends on the type of appliance and local electrical codes. For most fixed appliances, the National Electrical Code (NEC) in the U.S. requires that the receptacle be within a specific distance, typically within 6 feet for cord-and-plug connected appliances. Always consult local regulations and codes for the most accurate requirements.
What is NEC's population?
The population of NEC is 31.
What is the population of NEC?
NEC's population is 2,011.
