0
1200 Amps is a huge breaker. Typical houses might have between 100 and 200 Amp service. Since this would have to be a very unique installation you would have to provide a lot more information before cost could be computed. You also have to indicate who is supplying the breaker which would be a significant cost on its own.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Can you upgrade a 15 Amps circuit breaker for a 40 Amp for a 8.5 Watt shower?
Not unless you change the wiring for that circuit. The breaker protects the wiring and if you install a 40 amp breaker on a 15 amp wire circuit you will have a fire in your home.
What is making capacity of a circuit breaker?
Hard to define... A four year old child has the strength to physically "make" a typical household circuit breaker, while a teen would be able to "make" a typical industrial circuit breaker. (The latter breaker being physically much larger than the former.) Circuit breakers have their "breaking capacity" rated in AMPS. A typical household breaker is rated at 20, 30 or 50 Amps. Industrial breakers might be rated at 500 amps or a thousand or even more. Hope this helps but if it didn't answer your question, please rephrase it and ask again.
What size circut breaker for 10-2 wire?
A #10 wire has the capacity for 30 amps. No breaker larger than 30 amps should be used to protect the circuit.
What size amp circuit breaker should be used for a geyser?
Depends on how many amps it pulls and the size of the wire in the circuit.
What breaker for 17.3 amps?
I would suggest a 20 amp breaker. * Added - I would suggest a 25 amp breaker. A slight surge, depending upon what equipment is the source of the 17.3 amp load, should not result in circuit breaker opening. <<>> In North America, the electrical code only allows circuit loading up to 80% on a continuous load. A 20 amp breaker can be legally loaded to 16 amps. A 25 amp breaker can be legally loaded to 20 amps.
What circuit breaker to install for 10 amp 250 volt circuit?
You need a breaker rated for 10 amps and 250 volts. The breaker must also fit properly in your panel.
Can you upgrade a 15 Amps circuit breaker for a 40 Amp for a 8.5 Watt shower?
Not unless you change the wiring for that circuit. The breaker protects the wiring and if you install a 40 amp breaker on a 15 amp wire circuit you will have a fire in your home.
How much 1200 watts on one breaker?
Not a whole lot. Assuming that is 120 volt power, 1200 watts would be 10 amps. A standard breaker is 15 amps.
The Function Of A Twenty Amp Breaker?
It limits the current to the circuit at 20 Amps. If a load on the circuit draws more than 20 Amps the breaker will trip and interrupt the current to all devices on the circuit.
What is 6InA in circuit breaker?
61 nano-amps is 0.061 milliamps or 0.000061 amps
What is KA in Circuit Breaker?
KA stands for kilo-amps, or thousands of amps. Thus a 2KA breaker means it will trip when the load exceeds 2,000 amps.
What is the continuous current draw on a 20 amp circuit breaker?
Depends on what you have connected to the circuit. It is less than 10 amps or the breaker would trip. A rule of thumb is you design for about 80% load related to the breaker. For 20 amps that would equal 16 amps.
What would happenif you put an 8 amp circuit-breaker in a power circuit?
The circuit would be protected up to 8 amps before the breaker would trip. Any more that 8 amps and the circuit would open and shut the circuit off.
What size fuse required to supply a continuous load of 32 amps?
80% of 40 = 32 amps Load the circuit breaker to 80% choose a conductor to suit the circuit Breaker min.
14 gauge wire can be on what size circuit breaker?
15 amps
What circuit breaker rating do you need for a 3 phase electric motor?
The circuit breaker is sized to the full load amps of the motor times 250%.
How many amps would it take to kick a 15 amp breaker with 7 ohms resistance on a 277 volt circuit?
A 15 amp circuit breaker should trip at 15 amps regardless of the load voltages or impedances. If you have 277 volts and 7 ohms, the current would be 39.5 amps and a 15 amp circuit breaker should trip.
