0
How do you connect 15 A 250 v wires to the outlit the are four wires white black red and green from the wall and there are only three screws?
Wiki User
∙ 16y ago
Be sure that those wires coming from the box are for a recepticle and not a light switch.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What is Billie Eilish favorite color?
It changes it's usually green black or yellow, and she HATES blue
What color is crows blood?
Black
What was john Lennon's favourite colour?
Green
What is Avril Lavigne's favorite color?
Her favourite colour is black. She's currently into black and bright green, before that it was black and hot pink.black,white and shocking pink...!Her favourite colour is black. She's currently into black and bright green, before that it was black and hot pink.
What is the colar of the sky?
black or green
How do you install a 110 volt plug?
I'm first off assuming this is a brand new plug, not a replacement. Okay. Ground first(green). Make sure you've got enough bare copper to wrap around the bottom screw. Then, strip and wrap the white around either of the silver screws on the side of the outlet. Finally, connect the black to the hot side (brass colored screws). And you should be all set.
How do you wire an RJ11 telephone jack?
To connect an RJ11 telephone jack, first, strip the telephone line providing the dial tone. Then, strip those wires to show the copper. Then, loosen the screws on the jack. Connect the red wire to the red screw, and tighten the screw. Connect the green wire to the green screw, and tighten the screw. Connect the black wire to the black screw, and tighten the screw. Connect the yellow wire to the yellow screw, and tighten the screw. If the wiring does not match the colors of the jack, then follow these steps: First, connect the blue wire to the red screw, and tighten the screw. Then, connect the blue/white wire to the green screw, and tighten the screw. Then, connect the orange/white wire to the black screw, and tighten the screw. Then, connect the orange wire to the yellow screw, and tighten the screw. Then, screw the jack onto the wall with the appropriate screws. Connect a working telephone to the jack, and check for a dial tone. If you hear a dial tone, then you have successfully connected all of the wires to the jack. If you do not hear a dial tone, check to make sure that all of the wires are securely on the screws, and that none of the copper has come off of the wire.
How do you connect a tach on a 1998 Chevy Cavalier?
Connect the green wire to the brown striped black wire.
How do you get electricity to a wall switch when getting electircity from an outlet?
Simply run a wire from that outlet to that wall switch. Be sure you use the exact same wire size that you find in that outlet. It will be AWG 12/2 or 14/2. Do not mixes wire sizes. Connect the ground to green ground screw at outlet, and white wire to silver screw, and black wire to gold screw. At the light switch connect all white wires together under a wire nut and push them back into the box. Connect the ground wire to the green ground screw on the switch. Now connect the 2 black wires you have left, power in and power out, to the 2 screws on the switch. Does not matter which wires you connect to the 2 screws.
Can a 220-4 wire cord be reduced to 3 wire?
When flexible cords are talked about the ground wire is in the conductor count. A four wire cord will have black, red, white, and green coloured wires in the flexible cable set. A three wire cord will have a black, white and green coloured wires in the cable set. To use a four wire cord to carry 220 volts just use the black, red and green wires. Connect to the cord ends. Black and red to the outside blade terminal screws and the green wire to the green ground screw. To use a three wire cord to carry 220 volts just use all of the wires. Black and white to the outside blade terminal screws and the green wire to the green ground screw.
Dimmer switch that has one black wire connected to the left side and two black wires connected to the right side of the switch How do you connect these wires if you want to just install a regular flip?
Check the screws next to the wires and see what color they are if they are green, black, and red then do what i say next, if not you're screwd. just connect the red/black/green wires in the holes in the flip switch and be careful not to touch the wires just the protective covering and inert them they should auto lock in there...if not just screw them in.
How can you connect Altec Lansing ADA995 speakers to your laptop?
lime green, black and yellow
Wiring diagram needed for a GFCI connection to a hot tub?
Install the GFCI outlet is a location near the hot tub where it can be accessed and tub plugged in. Connect ground wire to green ground screw. Connect black/white wires to LINE side of outlet. Black goes to copper screw, white goes to silver screw. You connect the wires by inserting them into the holes marked LINE and then tightening the screws down tight.
How do you install a 20 amp switch for well pump?
Black/White/Ground power in and the same out. Tie the incoming and outgoing white wires together under a yellow wire nut and push them back in the box. Tie the ground wires together under a green wire nut and connect the pigtail from those ground wires to the ground screw on the switch. Connect the 2 black wires you have left to the 2 screws on the switch. Doesn't matter which black wire you connect to which screw.
How do you connect a 240 v cooktop with 4 wires to a service panel with 3 wires?
The new cooktop has a 4 wire connection. Red & Black are hot. White is neutral, and green is ground. You existing panel is wired with 3 wires. Black & Red are hot and green is ground. There is no neutral wire. Connect the black to black, red to red, and then connect the white and ground together at the plug.
What kind of screws are ground screws?
Ground screws are screws that have been ground into a fine paste in an industrial tumbling machine. They are extremely useful as a grout for tile. the term would apply to the green screw you find in electrical connections they are meant to connect the ground wire which is there to protect you in case of ground fault
I am changing a 3-prong to a 4-prong on a Speed Queen dryer. There is no indication as to color-coding for the wiring. Also there are 2 green screws instead of one. How do I decide which wires to hook?
The forth wire is to ground the body of the dryer. The cord should have red, black, white, and green wires. Red and black are hot, the white is neutral, and green is ground. The red, white, black in that order or reversed, black white, red, should go in a row where they connect to the dryer with the green one probably above it. If the center neutral lug has a bond to the chassis remove it. You have a dedicated wire to replace it now.
