You cant ! Dollars is a monetary unit, mils is a unit of volume and kw is a unit of electrical energy ! NONE of which have any relation to each other !
KWH (kilowatt-hours) is an energy (Power in KW x time in Hours if steady power, or otherwise the integral of power with respect to time). KW per minute means a rate of increasing power, and the fact that it is inside a cubic metre doesn't alter the fact that there is no equivalence, and cannot be related.
that should be 2.8KW
To convert kilowatts (kW) to cubic centimeters (cc), you need to clarify the context, as kW measures power and cc measures volume. If you're referring to an engine's power output, you typically need the engine's efficiency and specific power characteristics to make a conversion. For example, a rough estimate is that approximately 1 kW is equivalent to about 1.36 cc for a gasoline engine, but this can vary widely based on the engine design. Therefore, 4.8 kW could be roughly estimated to correspond to around 6.5 cc per kW, leading to an approximate volume of around 32 cc, but this is highly variable and context-dependent.
Depends upon the Kw rating of the generator. The higher the Kw rating the more fuel will be used.
To convert amps to kilowatts (kW), you can use the formula: kW = (Amps × Volts) / 1000. For example, if you're using a standard voltage of 240 volts, then 150 amps would equal 36 kW (150 × 240 / 1000 = 36). If the voltage is different, just adjust the calculation accordingly.
To convert cfm (cubic feet per minute) to kW (kilowatts), you first need to know the efficiency of the system. Once you have the efficiency, you can use this formula: kW = (cfm x pressure x efficiency) / 229. upheld wp-admin css where pressure is in psi.
kW x 1,000 = watts
To convert kilowatts (kW) to British Thermal Units (BTU), you can use the conversion factor 1 kW = 3412 BTU/hr. Therefore, a 5 kW heater would produce 5 kW * 3412 BTU/hr = 17060 BTU per hour.
Multiply by Amps.
To convert from watts per cm2 to kW per m2, you need to divide by 10,000 since there are 10,000 cm2 in 1 m2. So, 1.08 watts per cm2 is equal to 0.000108 kW per m2.
1 ton refrigerant= 3.5 kW
Kw x 3412 / 10000 = gpm I think
One MegaWatt is 1,000,000 Watts and one KiloWatt is 1,000 Watts. To convert MW to KW just multiply by 1,000. Answer is 20,000 KW
899
if power consumption is 130 KW. how can it convert into unit per hour.
1 RT (TONS REFRIGERANT EFFECT) = 3.516 kW
To convert 3.6 kW to BTU (British Thermal Units), multiply the kilowatt value by 3412.142. Therefore, 3.6 kW is equivalent to approximately 12280.91 BTU.